Digital Voltage Battery Power Indicator 2/3 Wires DC 0-150V 12V/24V/60V/96V Electricity Remain Battery Lithium Lead-

Specifications:

Basic performance :

Display color: blue

Voltage measurement accuracy: 1%

Power resolution: 1%

Supply voltage: DC4.0-30V

Voltage measurement range: DC0-150V

Dimensions: height 15mm/0.59in, outer diameter 25mm/0.98, mounting opening 22mm/0.87in

Wiring method: 2-wire or 3-wire automatic identification

Color: White

Quantity: 1 Pc

Suitable for all kinds of batteries, the ons can be set, and the alarm value can be set.

Wiring instructions:

Wiring method: 2-wire mode Measuring range 4-30v

- Connect the battery negative, + connect the battery positive, V+ dangling

Wiring method: 3-wire mode Measuring range 0-150v

- Connect the battery negative pole, + Connect the power supply positive pole (4-30v), V+ to the total positive pole

Size Descrtion: The opening is 22mm and can be glued and reinforced. The surface is rainproof

Note:

Transition: 1cm=10mm=0.39inch.

The voltage and percentage are linearly related. U-L corresponds to 0% of power, U-H corresponds to 100% of power

Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.

Due to the difference between different monitors, the ture may not reflect the actual color of the item. Thank you!

Package Includes:

1 x Digital Voltage Battery Power Indicator (The default 12V lead )

About model selection:

[Factory default second-line lead 12v] You can use it directly on lead- 12V when you get it. If you use it in other batteries, please reset U-L (undervoltage) and U-H (full charge).

More settings are as follows.

For changes, please refer to the following method:

1. There is a white high on on the back of the board. Pre the on for 3 seconds to display 1-U, release the on, pre 1 second to display UL, release the on, pre 1 second to display UH, release The on, pre 1 second. Display 4-d;

Second, when displaying 1-U, pre the on for 3 seconds, you can fine-tune the voltage measurement. At this time, release the on and pre it again. The voltage will be fine-tuned upwards. Pre and hold again, And then fine-tune it. You can adjust it repeatedly. Wait for the screen. Automatically save and exit after fing; generally no need to correct

The value is added, the stop is preed and Then the on is preed, the value is reduced, and the adjustment can be repeated after the screen is blinking. Automatically save and exit. This voltage value corresponds to 0% of the power.

At the time, release the on and pre it again. The value is added, the stop is preed and then The long pre, the value is reduced , and the adjustment can be repeated after the screen flickers. Automatically save and exit. This voltage value corresponds to 100% of the power

5. When 4-d is displayed, the display mode can be adjusted, and the long pre can change the value. V is the voltage mode, % is the percentage mode, and the V% voltage and percentage cycle are displayed.

6. When 5-L is displayed, the power alarm value can be adjusted. At this time, release the on and pre and hold again. The value is added, the stop is preed and then long preed, the value is reduced, and The adjustment is be repeated repeatedly. After the screen flickers, it will automatically save and exit. The default is 10%. When the battery level is lower than this value, the alarm will f.

7. After each adjustment value is set, wait until the screen fes automatically to save and exit before proceeding to the next operation, otherwise the new adjustment value will not be saved!

Setting example: Set up a battery-powered system. The lowest alarm voltage is 21v. The full voltage is 27.5V. The display mode is only showing the percentage.

Set as follows: select 21V in U-L, 27.5V in U-H, and % in 4-d;

Frequently Asked Questions: (Q & A)

1 : Power percentage and voltage Do you want to switch manually?

A: The default power percentage and voltage values are automatically displayed in turns and displayed in 2 second intervals. Users can also set their own fixed display one.

2 : I don't know how much my lithium battery is. How to buy it

A: Lithium batteries are generally divided into two kinds of lithium batteries: 3.7V/3.2v.

Lithium in the option is the default 3.7v (full charge is 4.2v) lithium battery. Look at the maximum output voltage of the charger/4.2V to get the number of strings. For example, the charger writes a maximum output of 54.6v. 54.6v/4.2V=13 strings. 12.6V/4.2v=3 strings. Lithium-free parallel connection.

3.2V lithium battery (full charge 3.6v). For example, the maximum output of the charger is 14.4v. 14.4/3.6v=4 strings. For 3.2v lithium battery, customers need to set it up.

3: I don't know my battery U-L, U-H is how much v.

A: The general approach is as follows

U-L is the battery undervoltage value, you can try to use up the power to finish the observation of how much voltage, v, set accordingly.

U-H is the full battery voltage, which can be filled with the charger. After the charger is unplugged, the voltage v is observed and set accordingly.

4 : How to connect, use 2 lines or 3 lines.

A: The battery voltage is le than 30V using the 2-wire method. For example lead- 6v, 12v, 24v. Lithium 7.4v, 12v, 15v, 24v.

The battery voltage is more than 30V, using 3-wire mode. See the wiring instructions in detail!

Note: The product does not have leads and requires welding conditions.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.