Din Rail Dual Display Adjustable Over Voltage Current And Under Voltage Protective Device Protector Relay 63A 220V 230V

Main technical parameter

l Rated voltage 230 frequency 50/60Hz

l Rate current 1A-80A,Adjustable(default 63A),

l undervoltage action cut off value:140-210V, adjustable(default 160V)

l Over voltage action cut-off value:230-300V, adjustable (default280V)

l Power recovery delay after power fai :5s

l Range of time delay: ls-600s adjustable,(default:30s)

l Electrical hinery life: minimum 50000 times

l Exterior dimension: 85x36x66mm

l Overvoltage and undervoltage restore value is 5V of the set value and overcurrent restore is 1A le than set value

l Please note the mode of up in and down out or down in and up out in ordering.

l Rated operation characteristics and operate time 10A,20A ,32A, 40A,50A ,63A.

l Rated turn on capacity protection device can be reliably connected and disconnected from the current value after continuous operation for long time Rated current priority value: 10A,20A ,32A, 40 X 50A,63A,80A.

l Rated limit overcurrent 63A,80A

Product setting

Click the SET key to enter the setting status

Over voltage setting

Please pre up and down key for revise if the overvoltage setting digital display overvoltage value indicator fes ,The default is 280V, it will progreively increase or decrease progreively by 1v for each pre ,its will progreively increase of decrease progreively by 10v after long pre up and under key

Under voltage setting

Please pre up and down key for modify within the range of 140-210V if the undervoltage setting digital display under voltage value indicator f, default is 160V it will progreively increase or decrease progreively by 1v for each pre ,its will progreively increase of decrease progreively by 10v after long pre up and under key

Over current setting

please pre up and down key for modify ,with range of 1-80A ,default is 20A. 1A for each pre un and down key, 10A for long pre up and down key

Delay setting

Please pre up and down key for modify of 1 S -600S if the digital dispaly delay value indicator fes. The default is 30s. 1s for each pre un and down key, 10s for long pre up and down key

Setting confirmation

Long pre SET key for 5 seconds to return to display input voltage value after the setting of all parameters. The setting is completed and saved

Function of ON/OFF key

The product will forcibly cut off the output relay and disconnect load to facilitate the maintenance of the circuit after preing power on, the product will restore output after delay of 5s and work normally after preing the key again.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.