Diy Gun Using Shrink Tool Heat 220v 300w Hot Power Temperature Seat Supporting Electric With 1pc Air

Diy Gun Using Shrink Tool Heat 220v 300w Hot Power Temperature Seat Supporting Electric With 1pc Air

Attention:

1. Do not blow the hot air gun directly at 90° to the object

2. The recommended distance between the air outlet of the heat gun and the heating item is 5-6 cm

3. The single use time of the heat gun should not be too long, usually 2-3 minutes. If the temperature of the fuselage increases significantly, please close the heat gun and wait for cooling before using it

4. The temperature of the hot air gun can only reach about 200°C, which can not be used in industrial aspects such as disaembly and welding of small iron sheet components and patch integrated circuit

Payment

1) We accept , , TT. All major credit cards are accepted through secure payment proceor ESCROW.

2) Payment must be made within 3 days of order.

3) If you can't checkout immediately after auction close, please wait for a few minutes and retry

Shipment

1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)

2. Orders proceed timely after the payment verification.

3. We only ship to confirmed order addrees. Your order addre MUST MATCH your Shipping addre.

4. The images shown are not the actual item and are for your reference only.

5. SERVICE NSIT TIME is provided by the carrier and excludes weekends and holidays. nsit times may vary, particularly during the holiday season.

6. If you have not received your shipment within60 days from payment, please contact us. We will the shipment and get back to you as soon as poible with a reply. Our goal is customer satisfaction!

7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.

8. Delivery Time:60 day

Return/

1. You have 7 days to contact us and60 days to return it from the date it was received. If this item is in your poeion more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A OR REPMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.

2. All returned it MUST BE in the pack and you MUST PROVIDE us with the shippinging number, specific reason for the return, and your po#.

3. We will YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its condition and pack with all components and acceories included, AFTER BOTH Buyer and Seller cancel the nsaction fromexpre. OR, you may choose to have a repment.

4. We will bear all the shipping cost if the product(s) is (are) not as advertised.

Warranty

All products have been checked and packaged in good condition before dispatch.

In case the item is defective, please inform us within 30 days of receipt, we will rep a new one. No s are offered.

Buyers have to pay for the return cost and we will pay the cost for resend.

Attention:

1. Do not blow the hot air gun directly at 90° to the object

2. The recommended distance between the air outlet of the heat gun and the heating item is 5-6 cm

3. The single use time of the heat gun should not be too long, usually 2-3 minutes. If the temperature of the fuselage increases significantly, please close the heat gun and wait for cooling before using it

4. The temperature of the hot air gun can only reach about 200°C, which can not be used in industrial aspects such as disaembly and welding of small iron sheet components and patch integrated circuit

Payment

1) We accept , , TT. All major credit cards are accepted through secure payment proceor ESCROW.

2) Payment must be made within 3 days of order.

3) If you can't checkout immediately after auction close, please wait for a few minutes and retry

Shipment

1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)

2. Orders proceed timely after the payment verification.

3. We only ship to confirmed order addrees. Your order addre MUST MATCH your Shipping addre.

4. The images shown are not the actual item and are for your reference only.

5. SERVICE NSIT TIME is provided by the carrier and excludes weekends and holidays. nsit times may vary, particularly during the holiday season.

6. If you have not received your shipment within60 days from payment, please contact us. We will the shipment and get back to you as soon as poible with a reply. Our goal is customer satisfaction!

7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.

8. Delivery Time:60 day

Return/

1. You have 7 days to contact us and60 days to return it from the date it was received. If this item is in your poeion more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A OR REPMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.

2. All returned it MUST BE in the pack and you MUST PROVIDE us with the shippinging number, specific reason for the return, and your po#.

3. We will YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its condition and pack with all components and acceories included, AFTER BOTH Buyer and Seller cancel the nsaction fromexpre. OR, you may choose to have a repment.

4. We will bear all the shipping cost if the product(s) is (are) not as advertised.

Warranty

All products have been checked and packaged in good condition before dispatch.

In case the item is defective, please inform us within 30 days of receipt, we will rep a new one. No s are offered.

Buyers have to pay for the return cost and we will pay the cost for resend.

Attention:

1. Do not blow the hot air gun directly at 90° to the object

2. The recommended distance between the air outlet of the heat gun and the heating item is 5-6 cm

3. The single use time of the heat gun should not be too long, usually 2-3 minutes. If the temperature of the fuselage increases significantly, please close the heat gun and wait for cooling before using it

4. The temperature of the hot air gun can only reach about 200°C, which can not be used in industrial aspects such as disaembly and welding of small iron sheet components and patch integrated circuit

Payment

1) We accept , , TT. All major credit cards are accepted through secure payment proceor ESCROW.

2) Payment must be made within 3 days of order.

3) If you can't checkout immediately after auction close, please wait for a few minutes and retry

Shipment

1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)

2. Orders proceed timely after the payment verification.

3. We only ship to confirmed order addrees. Your order addre MUST MATCH your Shipping addre.

4. The images shown are not the actual item and are for your reference only.

5. SERVICE NSIT TIME is provided by the carrier and excludes weekends and holidays. nsit times may vary, particularly during the holiday season.

6. If you have not received your shipment within60 days from payment, please contact us. We will the shipment and get back to you as soon as poible with a reply. Our goal is customer satisfaction!

7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.

8. Delivery Time:60 day

Return/

1. You have 7 days to contact us and60 days to return it from the date it was received. If this item is in your poeion more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A OR REPMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.

2. All returned it MUST BE in the pack and you MUST PROVIDE us with the shippinging number, specific reason for the return, and your po#.

3. We will YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its condition and pack with all components and acceories included, AFTER BOTH Buyer and Seller cancel the nsaction fromexpre. OR, you may choose to have a repment.

4. We will bear all the shipping cost if the product(s) is (are) not as advertised.

Warranty

All products have been checked and packaged in good condition before dispatch.

In case the item is defective, please inform us within 30 days of receipt, we will rep a new one. No s are offered.

Buyers have to pay for the return cost and we will pay the cost for resend.

Attention:

1. Do not blow the hot air gun directly at 90° to the object

2. The recommended distance between the air outlet of the heat gun and the heating item is 5-6 cm

3. The single use time of the heat gun should not be too long, usually 2-3 minutes. If the temperature of the fuselage increases significantly, please close the heat gun and wait for cooling before using it

4. The temperature of the hot air gun can only reach about 200°C, which can not be used in industrial aspects such as disaembly and welding of small iron sheet components and patch integrated circuit

Payment

1) We accept , , TT. All major credit cards are accepted through secure payment proceor ESCROW.

2) Payment must be made within 3 days of order.

3) If you can't checkout immediately after auction close, please wait for a few minutes and retry

Shipment

1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)

2. Orders proceed timely after the payment verification.

3. We only ship to confirmed order addrees. Your order addre MUST MATCH your Shipping addre.

4. The images shown are not the actual item and are for your reference only.

5. SERVICE NSIT TIME is provided by the carrier and excludes weekends and holidays. nsit times may vary, particularly during the holiday season.

6. If you have not received your shipment within60 days from payment, please contact us. We will the shipment and get back to you as soon as poible with a reply. Our goal is customer satisfaction!

7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.

8. Delivery Time:60 day

Return/

1. You have 7 days to contact us and60 days to return it from the date it was received. If this item is in your poeion more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A OR REPMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.

2. All returned it MUST BE in the pack and you MUST PROVIDE us with the shippinging number, specific reason for the return, and your po#.

3. We will YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its condition and pack with all components and acceories included, AFTER BOTH Buyer and Seller cancel the nsaction fromexpre. OR, you may choose to have a repment.

4. We will bear all the shipping cost if the product(s) is (are) not as advertised.

Warranty

All products have been checked and packaged in good condition before dispatch.

In case the item is defective, please inform us within 30 days of receipt, we will rep a new one. No s are offered.

Buyers have to pay for the return cost and we will pay the cost for resend.