DIY Large Screen 6 Digit Two-Color LED Clock Kit Touch Control W Temp/Date/Week Aug24 Whosale&DropShip

This DIY clock adopts 2 touch keys to control and adjust the settings conveniently. It can display time, temperature, date and week with 7 kinds of switch effectslarge LED screen. At the back side, the full-color LED can auto change and refract the color through the case. By the way, it can turn on the sounds control function then you can wake it up by clapping your hands or knocking on the table.

Features:
Large size two-color LED display.
12H/24H time format.
Touch keys to control(with sounds feedback).
One alarm function: turn on/off freely.
Sounds control function: you can wake it up by clapping your hands or knocking on the table.
Full-color LED changes colors automatically.
Hourly chime with backlight flash remind.
7 kinds of switched modes to display time, temperature, date and week.
Adopt real time clock chip, data will not lose when power off with the backup battery(not included).
USB DC5V for power supply, convenient and quick for use.
With transparent housing, components can be well protected.
Great DIY clock kit for electronic enthusiasts, easy to install.

Installation Instructions:
https://pan.baidu.com/s/1V-iTe4CHFxjLYuL3NfyHMg
password: ccsm
If the link fails, please contact us.

Function:
1. Touch both keys at the same time to enter or exit the menu;
2. Short touch the Next key(triangle shape) to select the functions: TIME(set the time), DATE(set the date), ALARM(set the alarm), SHOW(set the show mode), DISP(set the transition mode), Sound(turn on/off sounds control), FMT(set 12H/24H format), MOVE(set LED rectangular move mode), Brig(brightness of tubes), B-LED(backlight of the full-color LED), and then touch the Confirm key(round shape) to adjust the parameters.

Settings:
1. Alarm: ON or OFF;
2. Time modes: AA:BB:CC -- shows hour, minute and second; AA:BB -- shows hour, minute(the separator points will flash per second);
3. Switched modes: 0-time only; 1-spin mode; 2-up and down mode; 3-one by one mode; 4-left to right mode; 5-flash mode; 6-change directly;
4. Sounds control switch: ON or OFF;
5. Time format: 12H / 24H;
6. Rectangular move mode: 0-all off; 1-drag out mode; 2-single mode; 3-double mode; 4-up and down mode; 5-all on;
7. Brightness level: level: 1-5; A-automatic brightness(7:00-19:00: level-5; 19:00-7:00: level-2);
8. Backlight: 0-backlight off;1-change fast; 2-change slowly; 3-change slowest.

Specifications:
Middle Display Color: White / Blue / Green / Red / Ice Blue / Yellow(Optional)
Display Type: 6 Digit LED Digital Tube
Power Supply: USB DC 5V; 1 * 3V CR1220 Button Battery(NOT included)
PCB Board Size: 15.8 * 6cm / 6.22 * 2.36in
Finished Product Size: 15.8 * 6 * 1.8cm / 6.22 * 2.36 * 0.7in
Product Weight: 114g / 4.05oz
Package Size: Approx. 15.8 * 9 * 2cm / 6.22 * 3.54 * 0.8in
Package Weight: 142g / 5.02oz

Notice:
Button battery(NOT included) is just the standby power for keeping accurate, not power the clock(pls use USB DC5V).
The display color might be slightly differentpictures because of different monitors, pls in kind prevail!

Package include:
1 * DIY Clock Kit(Without CR1220 Battery)
1 * USB Cable