DIYKIT 4 Way Control Box Switch Video Converter for 360° Car Panoramic Camera System Rear Front Left Right Cam

This item support 4 AHD cameras or 4 CVBS cameras !!!

DON'T working with AHD camera and CVBS camera together!!!

All round view car camera control box

1.automatical round view When car engine starts.The system will activate the car monitor and the front view camera without pull bare gear or steering turning. The system will shut off the monitor  and camera automatically if no trier wire is activated ar 15 seconds.

2.Left / Right view controled by turning switch.When you don’t pull the re gear, only turn the steering lamps, this system will activate Monitor and Side view camera (Left/Right side view camera is controlled by Left /Right steering lamp). When steer turning is finished, ar 1.5 seconds,it will switch to front view camera, if no signal input, will shut off front view camera automatically ar 15 seconds.

3.Automatical rear view.When you pull the re gear, the system will activate the monitor and rear view camera till the re gear switch back, then switches to front view camera, if no any trier activation, front view camera will shut off ar 15 seconds.

4.Front view controled by switch(included)Ar pre Front View Switch, if no other camera triered, car monitor and car front view camera will be working all the time, but if a trier activate,it will switch the video to the activated operation. Ar that, it will switch bato front view video, you can shut off the front view video by repre the Front View Switch.

s:

The system working current: Max: 50MA. (Excludes working current of cameras)

The system working power: 9-30V. (Power supply to cameras is the same as the system input voltage, in 24V vehicle, please use 24V cameras)

System signal: PAL/NTSC/SECAM

Video output: 1.0VPP/75Ω

Working temperature: -20℃-80℃

Operation Temperature: -40℃-85℃