DriintePS Blind Spot System,Blind Spot r,Blind Spot Monitoring,12V Universal BSD Monitoring System Kit

★This blind spot s system is a vehicle aistance device that helps drivere changing safely during driving.★Adopting the most sensitive 24GHZ millimeter wave r, Detects whether a moving object enters the blind spot of the range on the side/rear of the vehicle.★【Distinguish fixed or moving object alarm】 Fixed objects do not give an alarm, while cars, pedestrians, bicycles, motorcycles, etc. in motion wilive an alarm when detected.★【Detecting Distance】When the system is on, the system would start detecting moving objectsobjects in the blind area behind the vehicle 11.5*50 ft.★【Warning Alarm Function】No matter it's night time, in rain, in fog or even in the snow,, Whenever a moving object suddenly enters the range, the LED fes and the sounds to remind the driver.★【2 Aistance Features】BSD - Blind Spot ; LCA -e change aistance;

Why did you choose us?DESCRTION

1. We are a manufacturer. Our products are sold directly. We guarantee stable quality and very favorable prices.2. Our products have paed CNAS certification and EU CE certification, so you can buy them safely.3. As a profeional manufacturer of automobile safety products, we can help our buyers to soe all the probl. We are a reliable partner for you.

of application and installation matter

1、Can install on cars with a plasticper only, not work with vehicles with a metalper.2、This item fits for most DC12v sedan, compact, SUV, MPVs, kup etc and profeional audio installer installation is required.3、The ACC cable must be controlled by the ignition switch of the car, if you connect the ACC wire with the constant 12V wire, the device may consume the car battery.4、The merchant has recorded a video of the installation and debuing of the key steps of the product. If neceary, please contact the merchant to request it.

BSD&LCA Blind Spot Monitoring

Detect target vehicles within 3.5*15 m（11.5*50ft) from the side of the vehicle. When a moving vehicle enters the area, the alarm light will light up.If the turn signal is turned on at this time, the alarm light will f and a beep warning will be iued at the same time.

Product Comparison

Seconeneration product advantage

Comparison of complete product

Comparison of r

This product use 24GHz millimeter-wave rs made in SwitzerlandThe quality of the ，Automotive grade waterproof plugPrivate mold, developed and produced by Dri

control box difference

This product is equped with a EU-compliant control box to oain more accurate speed, which is more likely to reduce speed errorsCar speed ≥20km / h, the product automatically starts to work, avoiding the alarm of low speed driving

Power cord difference

The product is equped with thicker power cables for faster and more stable nsmiion speedIncrease the cable protection tube, the wire will be more wear-resistant and corrosion-resistant, and prevent the mouse from biting the wire, more effectively protect the wire from wear and bility

of distance difference

Alarm mode

Tier 1 alarm: LED light is constantly onTier 2 alarm: Turn on the turn signal, LED light fes+BIBI sound alarm

Connection method

The ACC line must be controlled by the ignition switch of the vehicle. If it is not connected to the normal power for a time, there will be a risk of lo of power.

installation location

emove the rearper and determine the installation position of the probe module. The position is located at the aof the rearper of the car. Ar ing, the base of the probe bracket is installed.The angle and height are as shown in the figure below

Product Pack

Main components: 2 millimeter wave probes, 2 LED lights, 1 , 1 , 1 control boxAttachment: 1 set of main wires, 2 connection wires, 1 connection wire, 1 set of screws and ss, 1 instruction manual, 1 installation auxiliary card, 2 bracket