Dropsh 3 Colors Mini Wireless 433Mhz Cloning E Control Copy Code E 4 Channel Electric Cloning Gate Garage Door Auto-Shape Type Bla

kebidu 3 Colors Mini Wirele 433Mhz Cloning e Control Copy Code e 4 Channel Electric Cloning Gate Garage Door Auto

Descrtion

Material: Plastic.

Color: As tures show.

Type: Wirele e.

For: Such as electric telesco door e control, road gate e control, alarm e control and so on.

Rated voltage: 3V CR2016 Battery(included).

Wirele transmiion distance: 50-150 (m). (open space)

Feature

Multi-functional and multi-variable, personalized and user-friendly simple design and fast to use.

This smart copy e control is suitable for electric door e control, telesco door e control, garage door e control.

Cloning ch types:

2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527( EV1527,HS1527,HX1527 ),FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, 16F629,16F630 and so on. Different ch manufacturers have different prefixes ch model, as long as the digital portion of the ch can be the same model.

Note: We usually do not recommend copying a rolling code ch, because there are many uncertainties when copying a rolling code ch. When copying a rolling code ch e control, it is not poible to determine whether the e control ch is an ch. Therefore, we do not recommend copying the rolling code e control.

Use steps:

1. Clear code: two fingers at the same time hold the unlo key and lo key; the LED light rapidly fes 3 times in about 2 seconds; let one of the fingers go (the other hand cannot let go), and then use the loose finger to quily cli three times on the loose on until the LED light fes quily; the two fingers can release; then pre any one key of the e control; when LED light goes off, it means clear code is succeful(four keys all empty); if after you pre any on of the e control, the light is still on, it indicates that the code has not been cleared succefully. You need to re-clear, and only succefully clearing the code can cloning be succeful. You can repeatedly clear and clone the code.

2. Copy: left hand taking the e control, right hand taking our cloned e control and keep two e control as close as poible; pre the first keys of two e controls at the same time; in about 2 seconds, the LED light will f quily 2 times; after one second, the indicator light keeps fing and let go of your fingers; and then pre the key after succeful study, the light keeps on, which means that the first key code on e control has been copied to the other e control; the same method can be used in turn on the second key, the third key... If the copy is succeful, the e control function is the same as the matching e control.

3. Restore: When you accidentally clear the copy of the e control code, you can simultaneously pre the copy of the e control of the bottom two keys, LED lights will f quily, let go after preing any key, light long, this Indicating that the code for the e control is restored. Before using our copy e control, please be sure to remove the existing code from the e control.

4. How to deal with the situation where some of the keys can control, the rest cannot control? You can use clear and restore operation, the specific operation is as follows:

(1) first clear code;

(2) after clearing code, copy the unsucceful key again, and there is no need to copy the rest ons;

(3) and then clear the code again;

(4) restore code; at this time, the keys that were not succefully copied are now covered by new codes, and the keys that were succefully copied are now retained. If there is no copy after the second copy of the keys, repeat the above steps again and again until all keys are succefully copied.

Precautions:

1. Select the e control of the prerequisite: the e control function is normal, e control ch is the same or compatible, e control operating frequency the same.

2. The e control can only copy the fixed code, learn the code ch and part of the single-ch e control (can copy the ch model see copyable ch type).

3. Two-way e control, rolling code e control, single-ch program e control cannot be copied. Such as HCS200, HCS201, HCS300, HCS301 and so on.

4. Before copying the e control, make sure that the existing code on the e control has been cleared and che that the code is cleared succefully. Otherwise, it cannot be copied.

5. Please ensure that your e control has enough power, the distance between the two e control the better! If the copy distance is too close to the switch at different angles to copy. Pre and hold the on on the e control to send the signal completely normal, and then pre the on on the e control to ensure that the function is completely copied.

Paage included:

1 * 433MHZ e control duplicator.

Notes:

1. Please allow 1-3mm differs due to manual measurement.

2. Due to the different display and different light, the ture may not show the actual color of the item. Thanks for your understanding.

About shping
Shping and Pa All it will be double cheed and well paed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the paage to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedba, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at cheout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.Feedour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedba for the transaction.