Dual Display Red LED Panel 4.530V Digital Voltmeter 10A Current Range 10A

Specifications:
Working current:＜60mA
Display mode:0.28 LED double colors(Red)
Dimension:48x29x21mm
Installation hole size:45.5x26.5mm
Measured rate:500mS per time
Measuring accuracy: 1%
Minimum working voltage: +4.5V
working voltage: +30V

Operating temperature: -10℃ to +65℃
Operating humidity:10% to 80%
Operating :80kPa to 106kPa
Testing voltage:0-100V
Supply voltage range: 4.5-30V
Wire lead length:20cm
Current range:10A

Onboard Wire Instructions:
Thin Red Wire (VCC): positive pole of supply input (3.5-30V)
(Note: if the measuring signal is less than 30V and the is adequate, can be the supply of module)
Thin Black Wire (GND): negative pole of supply input (3.5-30V, common ground with measuring signal)
Green Wire (VIN): positive pole of measuring signal input (0-100V)
Thick Red Wire (I+): positive pole of current input (series connect on the supply cathode)
Thick Black Wire (I-): negative pole of current input (series connect on the supply cathode)

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a