E 1 To 3 Express 1X Slots Riser Card Mini ITX To External 3-E Slot Adaptere Port Multlier Card VER005 1X TO 16-1x 1 To 3

E 1 to 3 expre 1X slots Riser Card Mini ITX to external 3-E slot adaptere Port Multlier Card VER005 1X TO 16

About Descrtion:

Kind Ts: Because of the different batches, the color of the -e slot may be a little different. Hoep you can understand. Thank you! !

-E 1X 1TO 3 :

If you need more than one-E x1 slot on the was not any so much, it touches you can think about it. It consists of two parts, one main card, interface installed via-E X1 on the , two equment cards, both of which are connected together via USB 3.0 cable. The device card also uses the United States Pericom Pericom PI7C9X bridge ch, for switching-E,-E between. But even USB 3.0, but also the theoretical bandwidth 5Gbps (625MB / s), one Into four Then remove the lo would only 150MB / s, and even-E 1.x single-channel bandwidth also has 250MB / s, So this stuff more than enough to give you the best slots, there will not be enough bandwidth, not only for the performance requirements of the place. Therefore, the transferred-E slot is the best version above 2.0, the 3.0 version is better. Several Divided-E 1X slot all is gen2 mode, even if gen1 previously ,it can be ok!

Features: 2 layer bard designing. Compliant with expre 2.0, 1.1 Specification 1-slot-E 1X to 3 slot 1X riser card with high speed USB 3.0 cable. High speed USB 3.0 shield cable is ible for 1U,2U,3U chais. Support 3 port high speede 1X card. Solid provide extra stable power supply for-e card Mainboard size:(L*W*H)9.60*6.40*1.30cm/3.78"*2.52"*0.51" -E Card size:(L*W*H)11.80*6.50*1.90cm/4.65"*2.56"*0.75" USB cable length 60cm/1.97ft Product installation instructions First, when you use the adapter card, the computer needs to be turned off before they can plug the adapter card. 1. The first step, first ofe USB card plugged into the 'se slot. 2. Use USB3.0 data cable adapter to connect the ends of the two USB port. Plug in the power supply. 3.The third step: After completion of the above two steps, first in no hurry to insert your-E card, start the computer to see if your computer has been identified to the riser card, if you did not find the card, repeat the above operation (Note: The first time to insert card to start the computer, into the system in general will be prompted to install new hardware, such as "standard-to-bridge" , you need to wait for it to automatically install the complete, individual anti-virus will prevent these files installation, note skped), when your computer has been recognized the card,blue LED slot on normal light, computer equment manager in the system device will show an increase of several "standard-to-bridge 4. After completing the above three steps, turn off the computer, plug in your-E card, to be careful not to insert the contrary, 5. then boot into the system, install-E Card Driver E 1 TO2 / 4PortUSB3.0RiserCard:

-E 2/4 Port USB3.0 Card Plug and Play Interface Type:E 1X to 2/4* USB Bus Type:-Expre X1 Applicable Slot:-E X1, X4, X8, X16 Transmiion speed: 5Gbps Use: For Support system: DOS, Linux, Windows XP/7/8/10

Features: 1. An effective solution to the -E interface is not enough, an interface can be extended out of 2-port or 4-port usb3.0; 2. The use of plug-in design, without extension cable directly into the interface, and can be fixed to the chais, the stability and reliability greatly improved! 3. The main control board adopts-E interface direct power supply mode, no need to external power cord, so that the main control board power from outside interference, higher stability! 4. Reduce the number of adapter and adapter cable, a line directly to the interface, effectively reduce the interface interference and wire lo, to ensure data reliability, thereby improving work efficiency!

E 1xTO2 / 416x Slot withCable:

(Ts: Because of the different batches, the color of the and the bule will be a little different. If you mind this problem, please buy it carefully. Thank you! ) Features: 2 layer bard designing. Compliant with expre 2.0, 1.1 Specification 1-slot-E 1X to 2/4 slot 16X riser card with high speed USB 3.0 cable. High speed USB 3.0 shield cable is ible for 1U,2U,3U chais. Support 4 port high speede 16X card. Solid provide extra stable power supply for-e card USB cable length:60cm/23.63" (Approx.) Quantity:1Set

Please NOTE:

card Do not insert anti, anti-insert can easily lead to burn out Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon. And due to the difference between different monitors, the ture may not reflect the actual color of the item. Thank you!

Each paage contains:

-E 1X TO 3 PORT: 1pcsx Mainboard 1pcsxe card 1pcs x USB cable 1setx Screw -E 1X TO 4PORT: 1pcs x 1E 1X port to 4USBE port No cable NO 1x to 16x E. -E 1X TO 2PORT: 1pcs x 1E 1X port to 2USBE port No cable NO 1x to 16x E.

-E 1X TO4 16xSet: 1pcsx-E 1xRiser Card 4pcsxe 16x Slot 4pcs x USB3.0 Cable 4setx 15pin-6Pin Power Cable -E 1X TO2 16x Set: 1pcsx-E 1x Riser Card Mainboard 2pcsxe 16xSlot 2pcs x USB3.0 Cable 2pcsx 15Pin-4Pin Power Cable

-E 1x1to 3Port-E 1x:

( ant Ts: Now this item the usb cable color is Blue , not white. But don't worry, other all is same, such as the cable connector and the function is 100% same. If you care about the color, pls do not buy. Thanks!)

-E to Dual Port-E:

-E to 4 Port-E:

-E 1x to 4 16x Slot with Cable:

-E 1x to 2 16x Slot with Cable:

Ts: Now this riser we have upgraded, the board color not blue, is red. Other all is same, the function is 100% same as before. If you mind the board color, pls do not buy. Thanks!

About shping
Shping and Pa All it will be double cheed and well paed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the paage to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedba, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at cheout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbaYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedba for the transaction.