E To 8 Ports 3 III 3.0 6 Gbps SSD Adapter E -e X1 Controller Board Expansion Card Support X4 X6 X8 X16

Item Descrtion e to 8 Ports 3 III 3.0 6 Gbps SSD Adapter e -e x1 Controller Board Expansion Card Support x4 x6 x8 x16 Specification l 88SE9215 chset Ports: 8 6GB/s Ports Compliant with -E Specification V2.0 and backward compatible with -E 1.X Supports Native Command Queuing (NCQ) Compatible with 6G, 3G and 1.5G Hard drives Compliant with -E Specification v2.0 and backward compatible with -E v1.x Expre x1 Interface, and Compatible with Expre x1, x2, x4, x8 and x16 Slots l 88SE9215+JMicron JMB5xx chset Supports 10TB hard disk drives Non-R standard controller Special features System Requirements:Windows 10/8.1/8/7(32/64bit)/XP/Linux Interface: Expre x1 interface. Compatible with -E X1,X4,X8,X16 Slots Installation instructions 1:Please clean the gold finger of 3.0 card by eraser , Plug the cable of the chais into the card. Then connect all the hard disks. 2:Turn off the power of the computer and open the back cover of the PC; Remove the bars corresponding to the free slot on the chais. 3:Insert the expansion card into the corresponding -E expansion slot of the host 4:Secure the iron str of the expansion card to the chais with a screwdriver. 5:Close the chais and plug in the power cord to boot. After entering the system, install the driver Driver Installation 1. Insert the companion drive CD into the CD drive; 2. Open "My Computer", find the location of the disc, open the disc; 3. Locate the "CD:\ CARD\l\9215\drvsetup inside the .exe driver file; 4. Then follow the instructions of the computer to complete the installation, then restart the computer Check the installation Suitable for -E card with l 88SE9215+JMicron JMB5xx Chset: Open the "Device Manager", expand the "Universal Serial Bus Controller" option, if there is "l 92xx 6G Controller", the hardware and driver are installed succefully; if there is "unknown device" or other information, the hardware or The driver did not install succefully. If there is "Standard AHCI Controller" hardware information under "Device Manager" or "IDE ATA/ATAPI Controller", that means the driver didn't installed under windows10. Card layout The illustration below shows the major components of the 3.0 8 PORT expansion card.

Note: The 3.0 -E card must be installed in the -E slot of the , and can not be inserted into the slot. The fastest speed is 380-450m/s in -E 2.0 . If it is plugged into -E1.0, the speed only runs 200-300m/s. Different computer configurations and d have different speeds. If all ports are used at the same time, the speed will slow down. We recommend to use this 3.0 Card in E2.0 or 3.0 slot, so as to get the fastest speed. Port Multlier is not supported if the driver is not installed. We must install the driver to recognize all the hard disks. Be sure to turn off the power of the computer before inserting or removing the card, and then insert the card to avoid damage to the or expansion card. If there is no CD-ROM or driver disc can not be read, you can contact retailer to send driver for you. What's Include 1 x 3.0 Expansion Card 1 x Low Profile Bracket 1 x Driver CD Product tures

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.