E04D0 Maintenance Tank Maintenance Box With Chip For Epson EcoTank ET-7700 ET-7750 L7160 L7180 L7188 Waste Ink Tank

Product Informations

Type: Maintenance tank / Waste ink tank

Third-party brand: DSCINKS

Chip: One time chip

Warranty: 1:1 Replace Any Defective

Compatible Model: for Epson EcoTank ET-7700 ET-7750 L7160 L7180 L7188 printer

Using for Maintenance Waste Tank EcoTank ET-7700 ET-7750 L7160 L7180 L7188 printer

E04D0 Maintenance Tank Maintenance box with chip For Epson EcoTank ET-7700 ET-7750 L7160 L7180 L7188 Waste Ink Tank

use for Expression Premium ET-7700 ET-7750 L7188 L7160 L7180Network Multifunction Color printer

Replacing the Maintenance Box

1. Remove the new maintenance box from its package.

Caution: Do not touch the green chip on the maintenance box. Doing so may prevent normal operation and printing.

2. Using a flat-tipped screwdriver, remove the screw on the maintenance box cover and remove the cover.

3. Remove the used maintenance box

Note: Do not tilt the used maintenance box or take it apart.

Caution: Do not touch the areas shown below on the maintenance box; otherwise, ink may leak.

Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes,flush them immediately with water. If ink gets into your mouth, spit it out immediately. Keep the maintenance box out of the reach of children and do not drink the ink.

4. Place the used maintenance box in the plastic bag that came with the new maintenance box. Seal the bag and dispose of it carefully.

5. Insert the new maintenance box and push it all the way in.

6. Reattach the maintenance box cover and tighten the screw.

7. Press the OK button on the product control panel to resume operation.

Product shows