This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
Shipped from abroad
Free return within 7 days for eligible items.Details
Vast Ocean
86%Seller Score
16 Followers
Shipping speed: Good
Quality Score: Excellent
Customer Rating: Good
{infomodule}
Item Description: This miniature linear actuator is using for industrial, agricultural machinery, construction, clean sweeping vehicles, veels, cargo and many other applications. It can be replaced by hydraulic, pneumatic products ideal for saving energy consumption.
Material: Aluminum alloy Load capacity: 1500N Input Voltage: 12V DC Speed: 4mm/s Stroke Length: 100mm/4 inch 150mm/6 inch 200mm/8 inch 250mm/10 inch 300mm/12 inch 350mm/14 inch 400mm/16 inch 450mm/18 inch Working frequency: 20% Built-in limit switches
Technical Parameters: Rated power: 20W, maximum 30W. Push bar Each side contains a travel limit switch. When the telescobar runs to the top or to the top, it will automatically disconnect the electricity. The motor will not idle. Cut off the power, it can be stop at any position, with self-locking function. The push rod is driven by a DC motor with a screw drive. The telescorod can only be retracted without rotation. The motor is positive and negative. For example, if the positive electrode is stretched and the negative electrode is shrunk, the telescodirection of the rod can be changed by changing it. Ambient temperature -20°C to +75°C. Standard protection cla: IP54. Low noise design, noise level le than 42dB. Please do not disaemble the machine. Product features: drive other objects to push, pull, rise, drop. Product Applications: TV lift tables, maage beds, electric beds, chairs, electric equipment, micro-devices, electric sofas, camera frames, cameras and more.
Installation size: (1): The center distance between the two mounting holes before and after the push rod is fully retracted, the minimum mounting distance of the push rod (that is, the length of the push rod itself). Below 300mm stroke L (mounting dimensions) = 105mm + S (stroke) 300mm and 300mm above travel L (mounting dimensions)=155mm+S (stroke) (2): Center distance between the two mounting holes before and after the push rod is fully extended. (Below 300mm stroke) = 105mm + S (stroke) + S (stroke) (300mm and 300mm strokes or more) = 155mm + S (stroke) + S (stroke).
Notice: Before use, first recognize whether the motor voltage is correct. If it is a DC motor, then also consider that the power supply current is sufficient. Do not store or operate in high temperature or humid environment, and do not place in corrosive gas, which will reduce motor efficiency. When is required on the positive and negative power supply's motor terminals, the iron temperature is 340°C±40°C. Within 3 seconds of heating time. Do not deform the plastic. When installing the motor, pay attention to whether the screws are too long and the company must not over-pre the long screws to the parts inside the motor. Please note: Bracket and controllers need to be purchased separately, please search our products in our shop, and purchase the suitable kit.
Package Included: 1×Linear Actuator Motor
About shipping
This product has no ratings yet.
Subscribe to our newsletter
and be the first one to know about our amazing deals!