EMMC Module 16GB with Micro-SD Turn EMMC Adapter T2 for NanoPi/PC/RK3399 Development Board

Prograng system to eMMC module:Prepare an SDHC card with a capacity of 8G or above, unzip the EFer and the f tool win32diskimager separately, and run win32diskimagerI as an administor under Windows. On the interface of win32diskimagerI, choose your SD card drive letter After decompreing the EFer , click the Write on to to the SD card, or use the dd to write the EFer to the SD card under Linux.After the prograng is completed, eject the SD card from the computer, insert the development board and start the development board, then the system will start from the SD card and start automatically.EFer prograng tool, you have multe ways to operate EFer. 1: Connect or LCD display and USB mouse, operate EFer on the graphical interface. 2: Connect the development board to the LAN through a network cable, log in to the development board through h, and then enter the efer to operate according to the prompts of the line. (Note: The user loed in by h is root, the paword is , and the development board IP can be viewed (Obtained in the background of the router). 3: Log in to the serial terminal through the debuing serial port, enter the efer on the terminal to operate. 4: Connect an Icd2usb acceory to the development board, pre the acceory. The K1 key above can select the system to be programmed, then pre the K2 key to confirm the prograng, the prograng progre will be displayed on lcd2usb.After the prograng is completed, cut off the power, then pull out the SD card on the development board, and then power on again, the development board will start the system you just programmed from eMMC.Colour: blueMaterial: plasticSize: 18.5x16mmPackage Contents:1 * 16GB EMMC Module1 * Micro-SD turn eMMC adapter Only the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.