English OLED Screen T12/Jbc245/210/936 Electric Iron Control Board High Power Constant Temperature Digital Display LCD-English 1.3inch OLED

modname=ckeditor English Version

oled screen t12/jbc245/210/936 control panel LCD This control panel has three screens: 0.96 inch LCD screen 0.96 inch OLED screen 1.3 inch OLED screen Except the screen is different, other hardware and functions are the same! The display effect of OLED screen is better than LCD, and LCD has longer life span than OLED, please choose reasonably!

Control input voltage range: 9V--30V, maximum output 30V60A (MOS) T12 recommended voltage: 24V JBC245 recommended power supply: 24V JBC210 recommended voltage: 12V AT936 heating element: 24V ▲The lower the voltage, the slower the temperature rises, and the head will be damaged by exceive preure▲

Support automatic handle recognition and manual selection The default is automatic recognition mode, automatic recognition t12/245/210/936 Manual mode (settings→system setting→control mode→manual) At this time, you need to manually select the heating core, and automatically identify the fai

Support vibration dormancy and dormancy seat two ways The default vibration mode, by default the handle will not move within 3 minutes, it will automatically go to sleep! k up the handle to resume work after sleep. Sleep time related settings are in (Settings→Sleep standby→Sleep time→0-99 minutes) Hibernation mode (Settings→Hibernation Standby→Hibernation Mode→Seat) When the s sleep port is grounded (negative), it sleeps immediately, otherwise it works.

Free switching between two sets of UI The default is the power bar interface, you can choose the power ball interface (Settings→System Settings→Display UI→Default/Concise)

Support custom voltage value protection, when the battery is powered, a protection voltage can be set, and the power output will be stopped when this voltage value is reached to prevent the battery from over-discharging! (Settings→System Settings→Voltage Protection)

Support jbc245 core replacement protection to prevent short circuit and burn out the control board when 245 core replacement! Note that this function is not required for t12 and 210!

◥Basic operation◤

1: In normal mode, short pre the encoder to enter the preset temperature mode (pre-set 4 groups of commonly used stability according to your needs, and the rotary encoder can switch between these 4 preset temperatures), short pre again to enter the set temperature Mode, the temperature of the rotary encoder increases by 10 degrees each time, and the step temperature is adjustable!

2: In normal mode, long pre the encoder to enter the setting menu, short pre to select, short pre again to cancel the selection, long pre the encoder in the menu interface to exit and return to the previous level!

Note: DIY is risky. There is no guarantee that it will be done well. Shoot with hands-on ability.

'

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.