Entry System e Control Engine Start Car Alarm With Autostart Push Start Stop on PKE Cenl Locking Automation

Keyle Entry System e Control Engine Start Car Alarm With Autostart Push Start Stop on PKE Cenl Locking Automation

1.Paive Alarm/Lostatus:

When the e is taken out of 3-5 meters, will sound one time, then the system will be in alarming status automatically and locar door automatically under the mute mode, not sounds.

2.Paive Disalarm/Unlostatus:

When the e is within 2 meters, then system will be automatically in disalarm status and unlock, under the mute mode, not sounds.

3.Mute Arm or Disarm:

Manually pre e middle on one time,system is in the mute arm status,if want to exit mute mode, pre e unloon one time,and then pre middle on onetime under the mute mode,no sound when trier alarm.

4.PKE Function Enable&Disable:

4.1)In disarm status, hold the loon+unloon concurrently for 6 seconds; the will sound once, it indicates that the alarm system’s PKE function is enabled,under this mode, only e loand unlocar door,however, if repeat same action again, the sounds three times, PKE function is disabled!

4.2)if not use e more than 2days,PKE function will be auto off, this feature is to save e power!

5.e engine start Instructions:

5.1)In armed mode, preand hold the e loon more than 5 seconds, sounds 1 time, engine attemps to start. if you want to e stop engine, please excute above same operation.

5.2)e start car engine, car engine will be off automatically within 10 minutes if you have not the car door and step on the brake.

5.3)If engine is running ,it won’t be auto off if smart keys are out of the pke s induction range. this is for safety purpose.

5.4)If engine is under the off status, smart key is out of the pke induction range, anyone could not start and drive the car without smart key, this is smart key identification recognized function.

5.5)Remember to keep the car gear on neul position if you want to e start!

5.6)e to connect blaoil path wire if you want to e start! oil path wire is positive power, it has power only when start, but after engine is stopped, oil path wire has not any power!

6.Alarm:

6.1)Without smart key nearby car, the engine will be shut off.

6.2)Car is working,smart key is out, when the car shut off engine and open the door,system enter into alarm status,car won’t be started.

6.3)In alarm, illegal tread foot brake, will sound 25 seconds .

7.Smart key program:

Firstly power on, hold the learning on for ten seconds, system enters learning mode, and then pre any ons of e, learning is finished. you must finish 2 e learning within 10 seconds. Also this learning on is reset on, you can hold this on to disarm the illegal trier alarm.

8.Cenl loAutomatication:

Open the car door, tread the footbrake, start car engine,after 15 seconds, car doors will be locked automatically, in driving; after turning off the car engine,car all doors will be automatically .

9. Disarm:

If you lost 2pcs smart keys or 2pcs smart keys were damaged! How to disarm?at this time, pre and hold the reset on until alarm is disarmed after almost 7 seconds. at this time,car owner could drive the car like before!if never e a ignition after disarm,after almost 2 minutes,system will be auto arm again,pre on once,system exits the mode!

10.Service Mode:

Under the car engine off status,hold the e unloon,system enters service mode,pke function is auto be off,pre unloon again,pke function is auto returned to normal status.

11.Push start /stop engine:

11.1)Unlocar door,tread the brake,pre on once to start or stop engine;

11.2)Unlocar door,in the winter,pre the brake, pre and hold on the on to start /stop engine;

11.3)Unlocar door, without preing the brake, pre and hold on the on to start engine!

11.4)Unlocar door, without preing the brake,pre on each time,it will be ACC-ON-OFF as a circle!

Package Included:

1 x Host

2 x e Control Handle

1 x Start on

2 x Sensing

3 xLine group

1 x Manual

Currently the factory has been updated to the new pack. As shown below:

*** The key can be rep and installed inside the e control. Buyers prepare by thelves.The key is not included in this product kit. ***

*** The key can be rep and installed inside the e control. Buyers prepare by thelves.The key is not included in this product kit. ***

Suestion:Please be sure to read the instructions, refer to the wiring diagram for operation and installation, and be operated by automotive profeionals.Due to customs restrictions on package nsportation, this package does not contain on batteries.