ESUYA 4050~38 Steering Stabilizer Clamp For 1~3 8" OD Tube Tie Rod JK TJ XJ ZJ MJ 2007~2018 Car Accessories~1Pack

ESUYA 4050-38 Steering Stabilizer Clamp For 1-3/8" OD Tube Tie Rod JK TJ XJ ZJ MJ 2007-2018 Car Acceories-1Pack

Fitment:

Designed to mount factory and armarket style steering stabilizers utilizing a 1/2" mounting bolt and has a 5/8" mounting hole.

Perfectly fit for JK (2007-2018) Tie Rod, for Factory JK Tie Rod, for TJ/XJ/ZJ/MJ Drag Link. Rep part number: #4050-38

Features:

1) These are for steering stabilizers only and are not intended for use with the hydro aist. Some late model compatible with JK (2011+) factory stabilizers will require the inner bushing sleeve to be ed out to 1/2" for compatibility

2) Can be finished installation in a few minutes, it is very easy and simple. 100% bolt on components aures an easy, trouble with the use of basic hand tools

3) hined from high standard quality heavy duty steel with impact resistance, excellent solid and ble. Zinc plated for maximum corrosion and rust resistance for providing a reliable long-term service

INSTALLATION:

1.Verify correct location for the clamp on the tie rod by cycling the steering full loboth directions and extending and collapsing steering stabilizer.

2. Install tie rod clamp on the tie rod with the ½” mounting hole towards the steering stabilizer.

3. Attach the end of the steering stabilizer to the tie rod clamp using the provide;frac12;” bolt with a washer on top (and bottom if neceary).

4. Install all 6 socket head bolts into bottom half of clamp.

5. Verify clamp and stabilizer are rotated into the correct position.

6. Torque the socket head bolts to 15 lb-ft.

7. Torque ½ inch mounting bolt to 50 lb-ft.

8. Cycle steering loto loto e sure there is no interference.

9. Chebolt torques ar approximately 100 mile

Package included:

1x bolt, 2x washers, 6 x socket head cap screws