EWeLink WiFi smart socket remote control socket switch supports EWeLink APP control and Alexa/Google home speaker voice control

10A eWeLink wifi smart socket remote control socket switch supports timing function and Alexa/Google home speaker voice control
Product :
Wifi smart socket ：
Working voltage: AC100~240V, 50/60Hz
Maximum current: 10A
Remote control frequency: 2.4GHz
support App: eWeLink APP
Terminal platform: Android/IOS
Wifi: IEEE802.11 b/g/n 2.4G
Socket size: 54x54x51mm
Remote control :
RF frequency: 2.4GHz
Size: 118 x 40 x 10mm
Model of battery used: 2 AAA battery (note: the remote control does not include batteries, which need to be ordered by the customer)
Supports full opening and full closing
Functional characteristics
1. APP control: Control the device on/off by controlling the socket switch through the eWeLink app on the mobile phone
2. Support Google Home, Alexa speaker voice control
3. Timing countdown function: Set timing, countdown, and work schedule for socket devices through mobile app
4. Sharing function: Share devices with family through the app
Note: Without metering function
5. Remote control (only serves the purpose of powering off and on, for example: cannot adjust the wind speed and shaking state of the fan)
Can be paired with wireless switches with a frequency of 2.4G in this store (please consult customer service for specific models)
(Note: This remote control and socket cannot be confirmed whether it can be paired with sockets or remote controls from other stores)
RF433 frequency not supported
APP connection:
1. Turn on Bluetooth and 2.4G on your phone wifi
2. Press and hold the socket on for more than 5 seconds, the indicator light will flash quickly twice and remain on once to enter the distribution mode,
3. Open the app, click on the bottom, select "Bluetooth network distribution", click "Next", and the app will automatically scan for devices.
4. Click on the scanned device, and then select the device connected to the phone WiFi Confirm that the relevant information is correct, click 'Save', and wait for the device to be connected.
5. The device has been successfully added. You can modify the device name and click 'Add Complete'.
2.4G remote offline pairing
Offline pairing:
When in non pairing mode, quickly and continuously press the on 2 times on the socket, the socket will automatically open and close to enter pairing mode. At this time, press the switch remote control once, and if the socket is controlled, pairing is successful; (If pairing is not successful, please repeat the above operation)
Clear pairing:
When in non pairing mode, continuously press the on on the socket 8 times (within 5 seconds) to turn off the indicator light and clear the successful pairing.