Fingerprint Scanner Optical Biometric USB Fingerprint Reader Module Scanner Access Control Sensor Module for Company

CPU: 120MIz main frequency, 1M Bits Flash Menory, 1283 SRAM
Fingerprint Collector: Optical Capture
Fingerprint image size: 640 x 480 (pixel), 500DPI
Fingerprint registration capacity: The default is 1000, which can be expanded to 5000
False Recognition Rate (FAR): Less than 0.001 % (Security Level is 3)

Model: A33
Authenticity Rejection Rate (FRR): Less than 0.1 % (Security Level is 3)
Alignment method: 1:N and 1:1 alignment
Fingerprint board size: 570 bytes Byte
Security level setting: Level 1 to Level 5 can be set, the setting value: Level 3
Processing speed: fingerprint feature extraction time Less than 0.45 seconds 1:N comparison time (when 3000 full registrations) Less than 1.5 seconds
Communication interface: UART, 3. 3V-TIL level or USB communication
Serial communication parameters:
No parity Parity = IOIE, 1 stop bit Stop Bit= 1
No flow control F1ow Control = NONE
Baud rates 9600, 19200, 38400, 57600, 115200 (bps)
Factory setting: 115200bps
Working voltage: vin Voltage: DC3. 3V ± 10%
Working current: less than 30mA, the peak value is less than 100m when collecting fingerprints (instantaneous current)
Sleep current: less than 10uA
Working environment: Working temperature: -10T- 60pcs
Relative Humidity: 20%- 80%
Material: ABS
colour: black

Package Contents:
1 x fingerprint sensor

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.