Fit B140XTN02 B140XTN03 B140XTN07 Driver Controller Board EDP~30Pin DIY Kit LED Screen 14" Compatible~HDMI Laptop Panel 1366*768

Instructions for purchasing this kit:

1, Before purchasing, Please ensure that your screen model is exactly the same as the model in our list, and that the screen its can be turned on and displayed normally. If your screen is damaged, please do not p an order as this kit cannot repair and drive damaged screen.

2, If your screen model is not in our product list. Please provide us with the complete screen model to confirm the suitable kit (This is very ant, Wrong purchase may lead to unusable). The model label can be found on the back of the screen panel. As shown in the following photo:

3, Power adapter input: DC 12V 3A (DC Port: 2.5MM and 5.5MM inner+ outside-)

Please note: Do not a power adapter with voltage exceeding 12V, as this will damage the circuit board.

4, This controller board is only suitable for LED screen of EDP 30-Pin signal ports. When powered on, the indicator light is red and the keypad cannot be operated. The correct HDMI signal cable needs to be connected, and the indicator light will turn green before the controller board can start working. As shown in the following photo:

5, The kit includes:

1Pcs x Controller

1Pcs x EDP signal cable

1Pcs x Keyboard with cable

In addition to the products included in the kit, you may also need the following acceories:

DC 12V 3A Power adapter →Please click here

PH2.0 4-Pin Small speaker →Please click here

6, Please refer to the photos below for screen cable connections andguage settings. (OSD menu has multe interfaces. If different, please contact us)

7, If you have any probl during the operation. Please feel free to contact us. It's best to provide some photos or videos to help us check the problem. Blind negative evaluation does not soe any problem. Hope we can communicate to soe. Thanks in advance.

Below are photos from buyer feedback. For reference only.