for 70mai Parking Cable for 70mai 4K A800S A500S D06 D07 D08 00 Hardwire Kit UP02 for Car 24H Parking Monitor

for 70mai Parking UP02 Cable for 70mai 4K A800S Dash Cam WIDE D07 PRO Plus+ A500S Car A400 Hardwire Kit for 24H Parking Monitor in Ca

Can be used for:

for70mai Dash Dam 4K A800Sfor70mai Dash Dam Pro Plus+ A500Sfor70mai Dash Cam Lite D08for70mai Dash Cam A400for70mai Dash Cam Wide Mirro D07for70mai Dash Cam 00for70mai Dash Cam 1S D06 (Not for parking but for power supply)

Specification:Material: ABSOutput voltage: 5VOutput current: 1A/1.5A/2.5AStandby power consumption: ≤ 0.01WLow Voltage Protection: 11.6VOutput interface: Mini  usbNet weight: About 0.12kg

If you are worried about your car g damaged by someone else after parking, you can use our buline to connect the to ensure that the works 24 hours.If someone else hurts your car and the shotriers the G-r, the will immediately turn on and record the situation.

BuLine

Use the buline to not occupy the arette interface.First, connect the negative pole(blaline) of the buline to the ground of the car fuse box;Secondly, if you want to continue monitoring after parking (the works 24 hours), connect the positive pole(red line) of the buline to the BAT interface of the car fuse box;If you want to stop monitoring after parking (the does not work after parking), connect the positive pole of the buline to the fuse box ACC interface.

How to The Parking Cable?

1.Connect with Cae ACC power,when start car engine, will turn on automatically,when turn off car engine, will turn off automatically.2.Connect with Car battery or often electricity,can support 24 hours power for work,sipport car is Parking Monitor function.

Input:12V-24V; Output:5V/3A, hardwire kit is suitable for most car models(Voltage between 12-24V). Our hardwire kit Equipped TYPEC USB conversion cable,works for almost all car

We offer 2 different fuse holders and :

1* Car ACU Connector

1* Car ACS Connector

1* Car ACU Fuse

1* Car ACS Fuse

Medium fuse holder with mall fuse holder with fuse as the pictures show.

They can support most of cars

Use voltage drop line installation, does not occupy arette , arette

for mobile phone charging, saving space

Low-voltage protection: This is the protection when the normal power (battery) is connected, that is, when the input voltage is lower than 11.6, the main board will automatically power off and will not continue to consume the battery's power, So as to ensure that the car can normally ignite and start the car.

Step-down function:It can convert the voltage of 12-30V into the output voltage of 5V. The

input voltage of electronic products such as cardriving and are all 5V

Multe Security Protection

With low voltage protection, our hardwire kit will automatically cut off the power after 60s when the voltage is lower than 11.6V/23.6V (it depending on your vehicle). More security protection like over-current, short-circuit, re connection, and overheat.

4 DUAL-SLOT fuse holder

4 DUAL-SLOT fuse holder, Standard ATO, mini, low profile mini and micro2. 4 types, suit for most cars on the market

Fuse adapter installation

Fuse Adapter1. Pull out the orginal fuse at fuse box2. Insert the orginal fuse to LOWERslot on the adapter3. Insert fuse to the UPPER slot4. Insert the adapter to the fuse slot at fuse box

Wire Connection

If you just want the car key to turn the dash cam on or off, please follow these steps1. Red wire connect car key power ACC+12V2.Yellow wire connect with car key power ACC+12V3.Blawire connect with GNDIf you want 24h parking monitor function:1. Red wire connect car key power ACC+12V2.Yellow wire connect with 12V (B+) (not controlled by the ignition key, when your car does not start, it is still energized, it can be d with an electric pen)3.Blawire connect with GND