for DDPAI Hardwire Kit Type-C USB Car Charg for DDPAI Mini5 Z40 Z50 N3 Pro N1 Dual Car Dash Cam Mirror Camera Charging Cable

DDPAI 12/24V Type-C Car Charger 4M Hard Wire Hardwire Kit for DDPAI Mini 5/ Z40 / Z50 / Mola N3 Pro / N1 Dash Cam

Compatible with the type

DDPAI Mini 5/ DDPAI Z40 / DDPAI Z50 / DDPAI Mola N3 Pro Dash Cam

ligent recognition of vehicle status, better 24-hour parking monitoringChanging the ditional single wiring, using ACC + constant double wiring technology, after the adaption of Mini 5/ Z40 / Z50 / Mola N3 Pro Dash Cam, it can ligently determine the vehicle operating status. The dash cam automatically enters 1 frame per second time-lapse mode after the car shuts off, which will increase parking monitoring coverage time and data storage by 30 times, better realize 24-hour parking monitoring.

Input:12V-24V; Output:5V/3A, hardwire kit is suitable for most car models(Voltage between 12-24V). Our hardwire kit Equipped TYPEC USB conversion cable,works for almost all car

Car Charger 4M Hard Wire Hardwire Kit

5-layer safety protection, for safe driving

5-layer safety protection, greatly enhance the s- capability of the hardwire kit, more ligent protection for your dash cam and car battery.

High-fire-retant material, thiwire, high-and low-temperature resistant, more stable

Using High-strength ABS flame-retant material, pure 22 copper core, thicker than the general wire in market, large flow capacity, good electrical and thermal conductivity, Wire rod has been d for a number of rigorous indicators such as tensile strength, twist, and high and low temperature.

Multe Security Protection

With low voltage protection, our hardwire kit will automatically cut off the power after 60s when the voltage is lower than 11.6V/23.6V (it depending on your vehicle). More security protection like over-current, short-circuit, re connection, and overheat.

No break-in installation, safer and more reliable

power from fuse box, completely invisible wiring, it does not occupy arette , nor interface other external devices usage. No cable breaking installation, comes with the voltage setting, the owner can set a reasonable voltage value to protect the car battery according to the vehicle condition, safer and more reliable driving recording.

4 DUAL-SLOT fuse holder

4 DUAL-SLOT fuse holder, Standard ATO, mini, low profile mini and micro2. 4 types, suit for most cars on the market

Fuse adapter installation

Fuse Adapter1. Pull out the orginal fuse at fuse box2. Insert the orginal fuse to LOWERslot on the adapter3. Insert fuse to the UPPER slot4. Insert the adapter to the fuse slot at fuse box

Wire Connection

If you just want the car key to turn the dash cam on or off, please follow these steps1. Red wire connect car key power ACC+12V2.Yellow wire connect with car key power ACC+12V3.Blawire connect with GNDIf you want 24h parking monitor function:1. Red wire connect car key power ACC+12V2.Yellow wire connect with 12V (B+) (not controlled by the ignition key, when your car does not start, it is still energized, it can be d with an electric pen)3.Blawire connect with GND

How to The Parking Cable?

1.Connect with Cae ACC power,when start car engine, will turn on automatically,when turn off car engine, will turn off automatically.2.Connect with Car battery or often electricity,can support 24 hours power for work,sipport car is Parking Monitor function.