For Mercedes Benz M272 V6 M273 V8 Intake Manifold Swirl Air Flap Runner Lever Repair Kit 2721402401/ 273140070164

For Mercedes-Benz vehicles with the V6 M272 and V8 M273 engines commonly suffer from failure of the intake manifold causing vehicle faults. Our repair kit allows you to replace just the lever component that fails on the manifold with an improved design part which will not fail.
SYMPTOMS OF FAULT: Symptoms can include some or all of the below: Check engine light (CEL) is lit / on with P code P2004, P2005 or P2006 stored in the system. Engine control module has stored pending codes for intake manifold, air flap or runner control system.
Error messages; tumble flap stuck in activated position, intake manifold runner control stuck closed. Emissions test failure. Poor idle, loss of power, delayed acceleration, increased fuel consumption. To diagnose this fault you can visually inspect the manifold, remove engine covers and inspect intake manifold from above, using a torch you should be able to see down the front of the manifold and see if the lever is damaged.

Manufacturer Part Number:
2721402401, 2731400701, 272140240180, 273140070164
Interchange Part Number:
2721412080, 2721412380, 272 140 2401, 700246330, 70024 6260, 2721402001, 2721402101, 2721402201, 2721402401, 272140240164, 700410260
This repair kit can be installed in below for Mercedes Benz having M272 V6 or M273 V8 Engines:
2015-2009 G550
2013-2006 R350
2013-2010 S400
2012-2010 C250
2012-2008 C300
2012-2006 C350
2012-2007 GL450
2012-2008 GL550
2012-2009 GLK350
2012-2007 SL550
2012-2005 SLK350
2007-2011 CLS550
2011-2006 E350
2011-2007 E550
2011-2006 ML350
2011-2010 ML450
2011-2008 ML550
2011-2008 S450
2011-2009 SLK300
2010-2007 CL550
2009-2006 C230
2009-2006 CLK350
2009-2007 CLK550
2009-2007 E280
2009-2008 E300
2008-2006 SLK280
2007-2006 C280
colour:Silver
Material:Metal

Package Contents:
1 x Air Flap Runner Lever Repair Kit

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.