For Tecno Spark 7t Kf6p TFT Material LCD Touch Screen Display Assembly(No Frame) Mobile phone Parts smart phone parts

about Products
1. Replacement LCD Display Touch Screen Digitizer Assembly for Tecno Spark 7T Kf6p
2. Replace the Old, Damaged, Inoperable, Damaged
3. Make Your Device Look Better than before
4. Completely Fit and Work
5. Each Item Has Been Checked and Kept in Good Condition before Shipment
6. Professional Installation Is Strongly Recommended. Once the Screen Is Installed, We Will Not Be Responsible
Precautions before Installation
Tip 1: Test before Installation
Do Not Remove Any Protective Film Or Label during Testing. Please Pay Attention to the Static Problem.
before Attempting Any Repair, Be Sure to Wear ESD (Electrostatic Discharge) Tape. This Will Prevent Static Electricity from Damaging the Electronic Components in the Mobile Phone.
Make Sure You Wear Goggles and Be Careful Not to Cut Your Fingers with Glass Fragments.
Tip 2: Simulation Test
Screen Replacement Is a Very Fragile Product. We Strongly Recommend Testing before Installation. Please Simulate the Test, Which Means That the Mobile Phone Is Separated, (Motherboard LCD Or Screen) Connect the Audio Cable and the New Replacement, Power on, and the Test Is Completed. If the Test Is Successful, Install It. If It Cannot Be Displayed, Please Contact Us at the First Time. And Please Do Not Force It to Be Installed in the Mobile Phone. Once the Screen Is Installed, We Will Not Be Responsible.
Tip 3: Do Not Bend the Cable Excessively
Please Make Sure That the LCD Cable Does Not Bend Excessively. More than 90 Degrees of Bending Will Cause Black Display.

About the product
1. Replacement LCD screen touch screen digitizer assembly for Tecno Spark 7T KF6p
2. Replace your broken or unusable item with a new one
3. Make your device look more refreshing than ever
4. Completely fit and work
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.