Fosc53B Wireless Wi-Fi 5- USB Oscilloscope

5 input, synchronous display. Automatic measurement of amplitude, 4 measurement modes optional
Input capture (trigger) function
Any can be set as a capture (trigger) source
Can set rising or falling edge capture (trigger) signal. Capture (trigger) signal level adjustable. Data can be saved to the computer, automatically transferred to the saved data when the is started. Data can be backed up, and later at any time to view the backup data waveform. Can display any two s of differential signal
Lock signal to expand and compress waveforms up to 93 hours

Suitable for monitoring the operation of electrical equipment for a long time and archiving
Suitable for collecting and archiving data such as temperature, humidity and light for a long time
Wireless Communication: Wi-Fi 2.4G
Interface type: -USB 2.0
Signal input interface type: BNC interface, connected with the oscilloscope probe line
Maximum sampling rate: 150 kHz
Operating voltage: 5 V -USB interface power supply
Consumption current: Less than 170 mA
Measurable frequency range: 0Hz-----50 kHz
Amplitude adjustment range: 10 mV/-----1 V/
Input impedance: 1 M (Less than0.5V/) ; 330 ( equal 0.5V/)
Maximum measurement voltage: ±8 V, ±80 V for probe X10
Amplitude error: ±2.5%
Time domain range: 100 uS/-----10800 S/
Data recording and storage depth: 8388608 * 5
Maximum record and save data time: 93 hours
Connection :
Fosc53B oscilloscope has three connection methods, the can automatically select the connection mode:
1. Use USB cable to connect the oscilloscope to the computer. When the computer does not have Wi-Fi and cannot connect to , this connection mode is adopted. This connection requires aUSB driver to be installed on the computer.
Colour:As Shown
Material:plastic

Package Contents:
1 x Fosc-53B
1 x USB data cable
5 x BNC connector

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.