GRC RC Car 1 10 1 8 Roof Trunk B Luage Ra Climbing Car Retrofit Accessories G172YW S R Y B

GRC 1:10 roof luage ra# G172U

Introduction: The roof bracket seat and cro bar are made of carbon mixed nylon plastic, with aluminum alloy rods on both sides, which are light and tough, ensuring the strength at the same time

Reduce the weight of the roof. The mounting width of the bracket can be adjusted, and the length can be adjusted, which can adapt to various roof size

Material: carbon mixed nylon plastic+aluminum alloy

Applicable: 1:10/1:8 vehicle.

common problem:

1. When installing this kit, it is neceary to 2mm holes on the roof.

2. The shipment status is KIT parts, which need to be aembled

3. Refer to the installation instructions at the end of the page for specific installation.

4. Some models with short roof can be installed with this kit, which can be DIY proceed, and the length of some aluminum rods can be cut according to the specific roof size.

Effect demonstion of roof frame aembly completion:

GRC 1:10 roof box B model # G172Y

Brief introduction: The roof trunk adopts streamlined design, with unique waistline contour, and the product appearance is full of inp>

, can easily install a 6400mAh 3S battery.

Material: high flexibility plastic

Applicable: 1:10/1:8 vehicle.

No.:

Black: G172YB

Red: G172YR

Color: G172YW

Yellow: G172YY

Silver: G172YS

Blue: G172YC

Extreme speed grey: G172YG

Cage color: G172YK

common problem:

1. The bottom of this kit is flat and can be directly d to the flat roof with double-sided adhesive.

2. The shipment status is KIT parts, which need to be aembled by its.

3. If it is inconvenient to disaemble and aemble the R buckle of the car shell column after installing the trunk, the ic suction car shell column can be installed instead of the driving R buckle car shell column to fix it!

Demonstion of the effect of the completion of the aembly of the B type luage compartment: