1- BNC input/output CVBS coaxial cable video amplifier
1- female BNC video input and 1- female BNC video output
Resolution (HFGAI) and gain (GAIN) adjustable
Applicable for amplifying and balancing coaxial video signal from CCTV camera or other sources to distance transmission
High performance of anti-interference, adopting copper connector to reduce signal interference brought by contact
Adjustable to compensate and booster coaxial cable distortion
Long transmission distance and high image quality
The circuit consisted by independently isolated and compensated transistor loads output signal to 75
Specifications:
Voltage input: DC 12V +/-
Input/output impedance: 75
Input connector: 1x female BNC
Output connector: 1x female BNC
Frequency response: adjustable, compensate and booster coaxial cable distortion
Bandwidth (-3db): 10Hz ~ 7.5MHz
Gain: adjustable, up to 6dB
Max. output voltage: 2.5Vp-p
Dimension: 95(L)x85(W)x25(H)mm
Instructions:
1. Connect to DC 12V power supply. LED indicator is on.
2. Connect video source (CCTV camera) output to "Video In" BNC connector.
3. Connect output video cable to "Video Out" BNC connector.
4. After above connections are done, , adjust GAIN to video output voltage about 1Vp-p, secondly, adjust HFGAI (resolution).
5. Repeat above operations to get the best image quality.
Colour:Silver
Material:Metal
Package Contents:
1 x Video Signal Amplifier
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.