Head up Display M7 2 Car HUD Dual System Play and Plug Big Font Display Dasard meter for Vehicle Auto

Special Reminder:

This product working voltage: 11V~18Vdc (12Vdc/200mA) higher than 24 volts car please use USB cable.

This product is a dual system: 5 seconds ar power on, scroll wheel left dial to select the and system, no operation 5 seconds ar automatically enter the last selected system.

Automotive flat screen display, referred to as HUD is in the front windshield of the car to display driving data, such as speed, RPM, water temperature, voltage, single-segment driving distance, etc., to avoid the driver to watch the instrumentation in the proce of driving to affect the safety of the HUD can be in the large field of vision without shifting the conditions of instant reading of driving information, so that the driver always maintain the best driving condition!

System Selection:

Within 5 seconds ar power on, scroll wheel left dial to select and system no operation ar 5 seconds automatically enter the system

system: (support standard 2 standard interface car)

Vehicle speed, RPM, water temperature, voltage, distance veled when the engine is off, RPM icon, decoration icon.

display: switch down to display system common to all cars.

Speed, Voltage, Number of s, Speed icon, Decoration icon.

When is not compatible, unplug the power supply once to select system again.

Restore factory settings:

When HUD is off, pre and hold the scroll wheel vertically, turn on the power and the screen will be fully lit, release the scroll wheel on to restore the factory settings.

Eliminate fault codes:

Ar powering on and connecting to the protocol, scroll wheel right dial 5 seconds HUD screen is fully illuminated and clear the fault code, scroll wheel right dial again for 5 seconds to restore normal display.

Switch alarm sound:

HUD normal display ar the wheel wheel left dial 5 seconds to hear the sound of drops that is to open the , and then left dial 5 seconds to close the .

Enter setting mode:

Please watch the image on the windshield when setting up the operation, pre the wheel on vertically to the inside for 5 seconds to enter the setup it, the menu shows 1. At this time, through the wheel left and right tole to select the menu it (1.-11.) Vertical short pre the wheel on to enter the value, the wheel left and right tole to change the value, vertical short pre the wheel to return to the menu, vertical pre the wheel for 5 seconds to save and quit

Product Specification：

1. Use conditions: ambient temperature -40C-+80C atmospheric preure 86-106KPa

Relative humidity 10%-95% Ambient noise