High quality Car Battery Charger 12/24V 200AH Electric Car Dry Wet Battery Charger ligent Repair

Features:

*12V/24V 200AH Electric Car Dry & Wet Battery Charger

*Suitable for the 12V/24V 200 AH lead acid battery, including , UPS, wet battery and maintenance-free battery

*Adopts advanced width modulation (PWM) technology to automatically charge batteries through a 4-stage charging cycle

*Has 5 stage modes: Idle mode, Constant current, Constant Voltage, Floating charge mode and Trickle charge mode

*Overheating protection, short circuit protection, low voltage protection and re connection protection, safe to use

*Overheating protection: when the temperature of charger is over 1050C, the charger will stop working, when the temperature reduce to 800C or turn off the power 10 minutes the charger can work again

*Short circuit protection: when there has short circuit the charger stopped output and has a beep alert

*Low voltage protection: when the battery single cell voltage is lower than 1.5V the charger can't start and has a beeb alert, avoid damage battery

*Re connection protection: when the polarity of charger is ad with battery, the charger will close automatic and has beeb alert

*When the red indicator light of charging stops fing or is dark and as well as the current indicator fell to about 1 bars condition, the charging mode will change to floating charging, means the battery charging g finished

*Stopped automatically when charge full, auto revive and maintenance battery

*Has strong fan, the speed up to 4500/min

*Easy to operate

*100% and High Quality

Specifications:

*Color: s Show

*Voltage Range: AC 150-250V

*Charging Voltage Current: 12V/24V 10A

*Working Frequency: 50-60Hz

*Conversion Efficiency: 93%

*Working Temperature: -30~350C

*Dimension: 180*145*70mm/7.1*5.7*2.8 inches (Approx.)

5-stage modes:

Idle Mode:when there has no load connected with charger, the LED Screen will show voltage only, the power is about 2W.

Constant Current:means the battery voltage is lower than the set voltage of charger, then the charger supply constant charging current to maintenance both battery and battery charger.

Constant Voltage:advanced width modulation (PWM) technology, control the charger's current and output voltage accurate, avoid overcharge.

Floating Charge Mode:when the battery is going to be charged full, the charger will stop charging, but still supply constant floating voltage and small current to battery.

Trickle Charge Mode:when the battery voltage and current is approaching the set voltage and current, it will turn to trickle floating charge from automatic mode, it means charge full, also can be charged with floating mode.

Warm Tips:

1.12V input automatic charging mode, full electric voltage is 13.8V to 14.3V; 16V input manual charging mode must be artificial monitoring in case of overcharge if manual mode charging. We suest stop charging when the battery beating.

2.In the winter(When it is under 00C), use automatic mode to charge full first then use manual mode for 0.5-1 hours.

3.When the battery shell is heating, you must stop charging.

4.Using manual mode, can't more than 1 hour.

5.Do not blocooling hole or use the charger with the cooling fan off.

Package Contents:

1*Car Battery Charger

Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightne of your monitor and light brightne.