HTC1 Room Thermometer Digital LCD Indoor Hygrometer Humidity Meter Alarm Clock length lasting AAA Battery Life Portable Design

Hign-concerned Chemical : NoneTheory : Hygrometer : Mainland ChinaBrand Name : HpLive
Features:*Install battery--remover battery cover and install battery.*The ℃ and ℉ setting key is covered by the back bracket, press ℃ and ℉ key to switch ℃ and ℉ display.*Time setting--press “MODE”for 2 seconds,then the minutes time will flash. Press “MODE”to switch hour time & minutes time.press “ADJ”on to adjust the correct time.*12 / 24 hour setting--press “MODE”for 2 seconds,then press “MODE”for 2 times into 12 /24 hr setting, press “ADJ”to adjust 12/24 hr.* Month(M) and Day（D） time setting--press “MODE”for 2 seconds, then the minutes time is flashing, press “MODE”for 3 times into Month and Day time setting, press “ADJ”to adjust correct date,and press “MODE” to switch Month(M) and Day(D) setting.*Nowtime setting--press “MODE”for 1 time to switch alarm setting, press “ADJ”to switch on NowTime function.*Alarm clock setting--press “MODE” for 1 time switch alarm setting; press “ADJ” for 3 times to switch on NowTime and Alarm clock functions; press “MODE” for 2 seconds to alarm clock time setting; press “MODE”to switch Hour and Minute, press “ADJ”to set time.*Under alarm clock setting mode--press “ADJ” will show Calender.*Press “MEMORY” display show minimum temperature&humidity and maximum temperature&humidity.*Press “MEMORY” for 2 seconds to clear Maximum and Minimum.Specifications:Type: ThermometerMaterial: ABSBacklight: NoneText color: blackTemperature range: (-58°F ~ +158°F)Humidity range: 20% ~ 99% RHTemperature accuracy: ±1°C (1.8°F)Temperature resolution: 0.1°C (0.1°F)Humidity accuracy: ±5% RH (40% ~ 80%)Power supply: 1 x AAA 1.5VDimensions: 100mm x 93mm x 20mm/3.96" x 3.66" x 0.90" (approximately)Package Include:1* ThermometerNote:1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.2. Please allow slight manual measurement deviation for the data.