Infrared Human Sensor Module with Low Power Consumption and Fast Response for Industrial Automation Control,Default NO5246

• Full-automatic Induction: When a person enters the induction range, high level will be output; when a person leaves the induction range, high level will be closed automatically and low level will be output.
• Photosensitive Control (optional, not set at the factory): Can be set for photosensitive control, which is not sensitive during the day or when the light is strong. Temperature compensation (optional, not set when leaving the factory): when the ambient temperature rises to 30~32 ℃ in summer, the detection distance becomes shorter, and temperature compensation can be used for certain performance compensation.
• Two Trigger Modes: (jumper selectable) A. Non repeatable trigger mode: that is, the output will automatically change from high level to low level as soon as the delay period ends after the induction output high level; b. Repeatable trigger mode: that is, after induction output of high level, if a human body moves in its sensing range, its output will remain high level during the delay period, and it will delay to change the high level to low level until the person leaves.
• Induction Lockout Time (default setting: 2.5S lockout time): After each induction output (high level becomes low level), the induction module can set a lockout period immediately, during which the inductor will not receive any induction signal. This function can realize the interval work between "induction output time" and "blocking time", and can be applied to interval detection products; At the same time, this function can effectively suppress various interferences generated during load switch.
• Features: Wide working voltage range: default working voltage is DC4.8V~20V. Micro power consumption: quiescent current

1 * Infrared Human Sensor Module