Intelligent Programmable Countdown Timer Socket Electrical

Function description: The socket is ordinary converter,with two output 5v2A power uSBpower supply at the same time,can be very convenient in use electricalappliances and recharge the equipment at the same time,such as digitalproducts like lphone lpad,MP3,MP4 etc.The charge apply to full range ofinternational AC output,no-load power consumption less than 0.3w,with short circuit,overload,over-voltage protection,can be convenientfor your life and save more energy
Feature: ltem Number:TMUSB01. Product Size: 108.5x54x69mm. Max load power: 3680w. uSB port Out Rating: 5V 2.1A. Working voltage:180~260V AC. Voltage frenquency:47~63Hz. Working current:16A. Time Range:Count down 1hour-10hours. lP Level: IP20
Operation Temperature: o°C to +40℃
Time Accuracy:+-3min. Shortest Switching Time: 1 hour
Timer socket with 2 USB ports 5V 2.1A for charge Plug Type:EU Plug,it applies to Indonesia, , , , and so on
Voltage: AC220V
Color: white
Material: plastic
Timer Control Time Adgustment :
1. Press the power switch 1 time,the 1HOUR LED will light on.The Timerinto ON mode,uSB and control socket output ON .
2. Continuously press the power switch the LED light on,the Countdownmode and LED light on will change from
0.25HR,0.5HR,1HR,2HR,4HR,6HR.
3. you need countdown time mode,the mode LED will lightoon, countdown until countdown time finish,the control outputand uSB change to OFF
4. Then the countdown is ,The Time indicate LED will from high tolow auto change until Countdown finish off.
Failure :
1. check whether the power supply connection is good
2. check whether the uSB cable is loosen
Warning Note:
1. Use indoor and dry location ONLY
2. The load max does not 16A 3680w
3. This product does not convert voltage please do not miss use DO NOT the maximum loading of 3680 watts16A
4. Always have earth connection for safety reason
5. in doubt please with a qualified electrician Package Contents:
1 x Timer Switch Only the above package content, other are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.