jingyuqin 315/433MHZ 3/4 ons Car Entry e Key For Infiniti/Nissan Frontier Murano Armada Pathfinder 2002-2008 KBRASTU15

Condition: 100%

Features:e car key

design: car styling

Material: abs+metal

Color: show the picture

on: 3/4 ons

;HAVE

battery:have

circuit board;yes

Frequency : 315/433MHz

Weight: 25g

Fitment:

For Infiniti/Nian Frontier Murano Armada Pathfinder 2002-2008 KBRASTU15

And other model with the same specifications of key blank and battery holder listed as below section...

Prograng Instructions2003 - 2006 Nian 350Z

2002 - 2006 Altima

2002 - 2006 Maxima

2002 - 2006 Sen

2002 - 2004 Infiniti I35

2003 - 2005 Infiniti G35 (Without Smart Entry System)

PROGRAM SYSTEMFrequency 315/433MHz Can Change

1.   Close and loall doors with the driver’s side power lock/unloswitch.2.   Insert key into ignition and remove it from the ignition key cylinder at least six timeswithin 10 seconds. Your Hazard Lamps will f if you have performed this stepsuccefully. NOTE: Withdraw key completely from ignition cylinder each time. If thisprocedure is performed too fast, system will not enter prograng mode.

3.   Insert key into the ignition cylinder and turn to the ACC position.

4.   Within 5 seconds, push ANY on on the e nsmitter. Your Hazard Lamps shouldf. NOTE: Do not pre the on more than one time in the above step. If the onis preed more than one time, the prograng procedure will not be succeful.

5.   If there are any remaining nsmitters (including the old ones), unlothen loall doorsusing the driver’s side power lock/unloswitch and within 5 seconds, push ANY onon the e. Your Hazard Lamps should f. Repeat this step for eachnsmitter (including any existing nsmitters).

6.  Turn the key to the OFF position, remove keys from the ignition, unlodoors using thedriver’s side power lock/unloswitch and open the driver side door.

Features:

1. The item is a new DIY e key. Frequency 315/433MHz, blank .

2. The key includes key housing, circuit board, and battery. It's a full e key.

3. You'll need to program the key and cut the at locl automotive before using.

ant Note:

1.You need to go to your local dealer or shop to cut the key and program to your car, should charge  le

than Dealer.

2.Please e sure your key is exaxtly same as ours, if you are not sure please send your key photo to us for

confirming, we will help you to buy the correct key.

Package Includes:

1xkey

1xCircuit board

1xBattery

ant Note:please cheyour FCC ID and the same key shape with your key.