Kebidu Wireless Bluetooth 5.0 Audio Board USB TF FM Radio Module DC 5V 12V Car MP3 Player Support MP3 WMA WAV FLAC APE

Model: JQ-D117Main control IC: Zhongke Nanxun AB5362BBluetooth IC: Zhongke Nanxun AB5362B Bluetooth version 5.0Bluetooth call functionMusic format: MP3 / WMA / WAV / FLAC / APE lole format musicRadio FM frequency: 87.5-107.5 MHZFolder switching functionSupport function introduction: support MP3 / USB / TF/ LINE IN / FM / BLUETOOTH / e control connection / DC 5V or 12V (optional)About the structure: Panel size: 88 * 25 MM, the two corners of the panel and the position of the screw holes, and then the cover surface, the depth of the board is 24 MMThe above are the functions of the ons and interfacesUSB: Connect U disk (maximum support 32GB)Infrared receiver moduleLED: dial display, screen color display redTF: Connect TF memory card (maximum support 32GB)DC5V: 5V power supplyAUX: Audio input interfaceVOL- on (previous song/volume down): in MP3 state, short pre VOL- to last song, pre to decrease volume; in radio FM state, short pre to move up one ; in Bluetooth function Short pre is the previous Bluetooth song, pre is the volume decrease.PLAY/PAUSE on (play/pause): Short pre PLAY/PAUSE in the MP3 state to play/pause; short pre in the radio FM state to automatically close and save the station; short pre to play/pause in the Bluetooth function. pre the PLAY/PAUSE on to switch between USB / TF / FM / LINE IN / BLUETOOTHVOL+ on ( song/volume increase): short pre VOL+ in the MP3 state for the song, pre to increase the volume; short pre in the radio FM state to adjust one station down; short pre in the Bluetooth function For the song in Bluetooth, pre to increase the volume.

1. Bluetooth version 5.0

2. Support calls (pre the e control pause on to answer the call when there is an incoming call).

3. Support 3.5MM head microphone function

4. Support . only supports operation in TF mode or USB mode.

(pre the e control MODE on to start , pre the e control PLAY on to switch between and music playback; when , you need to connect a storage device, such as: U disk or TF card;) 5. Support power off memory

5. The power supply voltage supports between DC 6v-12v, and the current is between 1-3A.

6. Can be directly connected to speakers, with power amplifier and de functions.

7. Support song format MP3 /WMA / WAV / APE / FLAC

8. Main functions MP3/USB/TF/LINE IN/FM/BLUETOOTH/e control/

9. Power 40W, stereo 2*20W.

10. Support folder selection and playback. When USB or TF is playing, when there is a folder in the device and there are songs in the folder, pre the previous on or the on twice to select the folder to play the song, and the screen will display F001-F00? and so on, yes? F00 is displayed for each folder?