Kit3 Remote Control Clone Duplicator Control - 433mhz - Electronic Gate, Garage, Vehicle

☛There are 4 buttons on the remote which means you can clone 4 buttons on the remote which means you can clone 4 buttons. Each button works independently. The clone remote control can be reset and configured without limited times

Specification:
Certification: CE
Origin: Mainland China
Model number: copy remote control
Material: plastic metal.
Color: black.
Operating frequency: 433MHz  433.92MHz.
Number of keys: four keys
Type: Wireless remote control
Application: as remote control for electric retractable door, road door, alarm, Car and motorcycle alarm system,etc.
Working voltage DC6V (with built-in 2016×2 button cell)(Battery included)

Nominal voltage: 6(V)
Rated current: 10 (mA)
Wireless transmission distance: 100-150m (open space)
Size: 35 × 68 × 15mm
Weight: 42g

Inlucde Battery:Yes.

Package included:
3*433MHz remote control duplicator [Keychian, manual] with opp bag

Tips:
1. Select the remote control of the prerequisite: the Your current use of the remote control function is normal, the remote control IC code is the same or compatible, remote control operation frequency the same.
2. Before copying the remote control, check whether the existing code on the remote control has been cleared and check if the code has been cleaned successfully. Otherwise, it can not be copied.

Cloning  IC code types:
2260 (pt2260, sc2260, lx2260, hx2260); 2262,(pt2262, sc2262, lx2262, hs2262, hx2262), pt2264, pt2240 (lx2240),1527 (ev15 hx1527), fp527, cs5211, smc918, smc926, ax5026, AX5326-3,AX5326-4, ht600, ht680, ht6207, ht6010, ht6012, ht6013, ht6014 pic16f630 ,HT6P20,HT6P21,HT6026,HCS101,HCS201,HCS301and so on. Different IC code manufacturers have different prefix code models, far as the numerical part of the code is the same it is compatible with our copy remote.

Mode OF USE:
1. Make sure that Newly purchased remote control of  the existing code on the remote has been erased :   you  neet to press  button "A"and "B" at the same time for three seconds,when the led flashes and turnes off,then click "B" button for 3 times(meanwhile"A"key still holding on all the time),when the LED  flashes  and tures off ,the memory code is erased.
2. Copy from one to the other with  Your own current use of the remote control: Press the buttons one to one at the same time, (press the copy remote control with one hand, press the  Your own current use of the remote control with the other hand),The two remote need to be close to each other to try to pair. when the copy LED indicator light  flashes all the time,then release them . 
3. When you press the clone remote control button, the LED indicator  light flashes all the time, Means that the button of  the remote control of the matching code is successful.The other buttons also operate like this.