Koorinwoo Wireless Parkmaster EU Number Plate Frame Rear view camera Car parking 2 With LCD Car Monitor NO

High-resolution picture: 800 * RGB * 480.

With 2 video input port, white video cable connects to car rearview camera, the yellow one connects to DVD or VCD.

When parking the car, the rearview image appears onto the screen automatically.

Designed ith menu ons,the brightne/const/hue/language is adjustable.

Support language: English, Chinese, French, Ruian, German, Italian, Spanish.

Supports car DVD, VCD, camera, and other video equipment.

Easy installation without dam any parts of the car: just clip on the mirror.

Easy installation ,without dam any parts of the car, clip on the mirror

No Audio input or output.

Screen Size: 5 inch TFT 16:9 screen

Display Component: Color TFT-LCD

Video system: PAL/NTSC compatible

Power supply: DC 12V

Hight Resolution: 800*480

Rated power consumption: 3W

Operation temperature: -40~+50°

Storage temperature: -40~+60°

European Plate Frame New Arrival

Easy installation by screw under plate

Fits UK/EUropean plates

Alarm by three-step bibi sound

Display the distance and direction of obstacles on the display

With LED or LCD dial display

Three ulsonic detect obstacle

Car Camera:

Brand:Koorinwoo

Rated operating voltage: DC 12V

Operating voltage range: DC 10V ~ 15V

Operating Current: 20mA ~ 500mA

170 Degree

TV System: Pal or NTSC (Defaulat)

range: 0.3 ~ 2.5m

Ulsonic Frequency: 38kHz / 40kHz

Host Operating temperature: -40 ° C ~ + 85 ° C

Volume: 65dB

Probe Installation: European plate frame

Probe diameter: 19mm

Sound frequency: 1.6-2.0m: 0.5HZ (slow); 1.1-1.5m: 1 HZ (slow); 0.6-1.0m: 3 HZ (rapid); 0-0.4m: sounding

No need to e the hole to hurt your car, east to install. Show the distance on the screen and with speaker to remind you the distance. perfect design.

This is an advanced wirele module for car re camera that enables normal re camera to become wirele!

This listing is for the wirele module only.only can use one cameraHow to Install a Camera with the Wirele Module

Take out your sto plate light at the baof your car.

Fix the camera to where the sto plate light was.

Connect the built-in plate light of the camera to where the sto plate light was connected to get the power

Connect the wirele module (nsmitter) to your camera via the two cables - one plug for AV output and one plug for power

Connect the wirele module (nsmitter) to the re light of your car to get the power - red wire for positive and blawire for negative

Connect the wirele module (receiver) to your car battery or arette to get the power - red wire for positive and blawire for negative

You will see the images when your car is in re shiftand mirror image.