LCD Display Adjustable Direct Current Stabilized Voltage

Two types optional, you can choose XY-6020L and XY-6020L base plate depending on your demands.




XY-6020L: Includes a voltage regulator, a base plate and 2 cables. The direct current voltage regulator is constant voltage and current design, with the output voltage of 0.0-60.00V, output current of 0.0-20.00A, and output of 1200W. Full-view special supplys LCD large screen display, complete data display, simple operation, can provide stable working performance.




XY-6020L base plate: Output voltage can be set, with the fixed voltage output of 5/9/12/24/36/48/60V. Low-cost communication supplys, through a TTL to 485 module or WIFI module, it can realize the remotely controls of multiple machines, a separate base board can realize communication control, low-cost solution.








Features:

Voltage Stabilizer:



Direct current voltage regulator, which is constant voltage and current design, with the output voltage of 0.0-60.00V, output current of 0.0-20.00A, and output of 1200W.



Full-view special supplys LCD large screen display, complete data display, simple operation, can provide stable working performance.



In the operation interface, short press the encoder button, the (W), capacity (Ah), energy (Wh), time (h) will be displayed in turn in the downstream; short press the SW button, switch into the input and output voltage display; long press the encoder button for 2 seconds to lock the set voltage and current to prevents misoperation.



10 groups of storage function, there are 10 groups of data from CD0 to CD9 (CD8=12 V; CD=24 V is not adjustable), the data is saved to CD0 by default.



Support serial communication standard MODBUS protocol.



Multiple protections, voltage under voltage protecting, over voltage protecting, over current protecting, over protecting, over capacity protecting, timeout protecting, over temperature protecting, external temperature protecting.



Multi-parameter value setting, support setting input voltage undervoltage protecting value, overvoltage protecting value, overcurrent protecting value, overpower protecting value, maximum capacity, maximum energy, running time, -on status, and running interface rotary encoder, default setting parameters (CV or CC).








Base Plate:



Solid material, input adopts a common-mode inductor, significantly reduce the impact of the input supplys wavenumber, to achieve low wavenumber output.



Intelligent temperature control design, fan with large area heat sink, with superior heat dissipation effect.



Output voltage can be set by dip switch, with the fixed voltage output of 5/9/12/24/36/48/60V.



And the base plate can be used independently, the output current of 0-20A, the back of the base plate with true value table.



Low-cost communication supplys, through a TTL to 485 module or WIFI module, it can realize the remotely controls of multiple machines, a separate base board can realize communication control, low-cost solution.








Specifications:



Name: Direct Current Voltage Stabilizer



Material: plastics+rinted circuit board



Type: XY-6020L, XY-6020L base plate
(optional)



Input voltage: 6.0-70V



Output voltage: 0.0-60V



Output current: 0-20.00A



Output ripple typical value: 100mv VPP



Output : 0-1200W



Maximum output voltage: (input voltage ÷ 1.1)-2



Input voltage measurement resolution: 0.01V



Output voltage setting measurement resolution: 0.01V



Current setting: 0.01A



Input voltage measurement resolution measurement accuracy: ±1% + 5 words



Output voltage setting: ±0.4% + 1 word



Output current setting and measurement accuracy and measurement accuracy: ±0.5% + 3 words



Cooling fan on: current>2A, >50W, temperature>50℃



Cooling fan on and then off: current