LCR-TC1 1.8" TFT LCD Display Multi-meter Transistor Diode Triode Test Meter ESR LCR NPN PNP MOSFET COD

LCR-TC1 1.8" TFT LCD Display Multi-meter Transistor Diode Triode Test Meter ESR LCR NPN PNP MOSFET COD

Feature: For detecting NPN and PNP transistor, , , diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, and and other components, etc. Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the ba light TFT screen clearly. ( Use 12864 liquid crystal display with green balight). After detection, align the infrared remote control with the "IR" light, then pre the button in the remote control, if the detector succefully decode it, it will display the data code and infrared wave form. Measurement results represent by TFT graphic display(160x128). Support Chinese and English. One key operation, Auto Power Off(Timeout Settable). Can also pre the multi-functional button to close the detector. Specification: Color: White Size: 70*90*28mm/ 2.71x3.58x1.10 inch Display: 1.8 inch TFT Screen, Color Screen Diode Range: le than 4.5V Transistor Detect Area: 0.01-4.5V Zener Diode Detect Area: 0.01-30V Triac Range: IGT le than 6mA Capacitance: 25pF-100mF(Please discharge before testing) : 0.01-50MΩ Inductance: 0.01mH-20H Power Voltage: 3.7V Power: Built-in Rechargeable Lithium Battery Paage Included: 1 * Multi-functional TFT Transistor 1 * Electronic Component Set 1 * Micro USB Cable 3 * Test Hook Operating Instructions Key operational definitions

Multi-function key has two actions:

Short pre: Pre the key and not le than 10 ms, release key within 1.5 seconds

Long pre: Pre the key more than 1.5 seconds

Power on

In the power off state, short pre the multifunction key, the is turned on and automatically measured.

Power on & measurement interface

Detect transistor

In the power off state or the test is completed, put the test element into the transistor test area of test seat, and pre the loing handle, short pre the multifunction key, the automatically measure, graphical display of measurement results when testing is complete.

Warning: Always be sure to DISCHARGE s before connecting them to the ! The may be damaged before you have switched it on!

Warning: We do not recommend using the to measure the battery! The battery voltage must be le than 4.5V, otherwise the may be damaged!

Component placement

Test seat are divided into transistors and zener diode test area, detailed in 1.1 Descrtion.

No, unknown, or damaged part

About shping
Shping and Pa All itwill be double cheed and well paed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the paage to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedba, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at cheout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbaYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedba for the transaction.