LCR-TC1 LCR-TC2 LCR-T7 TC-T7-H TFT Multifunctional TFT Backlight Transistor For Diode Triode Test

LCR-TC1 LCR-TC2 LCR-T7 TC-T7-H TFT Multifunctional TFT Backlight Transistor For Diode Triode Test

4 versions difference

LCR-T7/LCR-TC1: Color screen/M324 ch, the two functions are the same! T7 is a little faster! The TC1 has a slightly larger screen and is powered by lithium batteries. In addition to measuring resistance, capacitance, inductance, diodes, MOS tubes, and thyristors, it can also measure additional voltage regulators and infrared decoding (Hitachi format only)

TC-T7-H: is the upgraded version of LCR-T7, the latest/fastest version

LCR-TC2: It is an upgraded version of TC-T7-H. Compared with TC-T7-H, it has upgraded circuit structure, long-term battery life, optimized code, and resistance value of 1/1000 (this is related to the consistency of repeated testing, that is, the same resistance will change without repeated testing, and some An error will occur if the test is repeated)

LCR-TC1

Feature:

Self-test with automatic calibration

Size: 70*90*26m/ 2.71x3.58x1.10 inches

Display: TFT screen, color screen

Diode range: le than 4.5V

Zener diode: Transistor detection area: 0.01-4.5V

Zener diode detection area: 0.01-30V

SCR range: IGT is le than 6mA

Capacitance: 25pF-100mF

Resistance: 0.01-50MΩ

Inductance: 0.01mH-20H

Power supply voltage: 3.7V

Power supply: built-in rechargeable lithium battery

Measurement results using TFT graphic display (160x128)

One key operation

Automatic shutdown (timeout setting)

Built-in high-capacity rechargeable lithium-ion battery

Lithium-ion battery voltage detection

Support Chinese and English

Warning: Built-in lithium ion battery, it is strictly forbidden to immerse the in water or close to a heat source!

Warning: For your personal safety, please strictly abide by the regulations and precautions for using lithium-ion batteries!

Transistor detection:

After the power is off or the test is completed, put the test component into the transistor test area of the test socket, pre the lock handle, pre the multi-function on, the will automatically measure, and the measurement result will be displayed at the end of the test.

Warning: Before connecting the to the , be sure to discharge it! The may be damaged if it is not turned on!

Warning: We do not recommend using a to measure batteries! The battery voltage must be le than 4.5V, otherwise the may be damaged!

Component placement:

The test socket is divided into transistor and Zener diode test areas, as described in 1.1.

Note: Do not perform other operations during the calibration proce, so as not to affect the calibration accuracy!

Packing list:

1 x Multifunction TFT transistor

1 x electronic component group (sent randomly)

3 x test hook

Short-circuit the three test sockets, short pre the multi-function on, and the will automatically calibrate.

After the short-circuit wire is disconnected according to the prompts during calibration, no other operations are required.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.