Lead Acid Lithium Battery Capacity Indicator DC 8V-100V Li-ion LiFe PO4 Car Motorcycle Power Display 12V 24V 48V 72V

Product selling points:

1. High stability

2. Strong reliability

3. service life

4. Accuracy error calibration with adjustable potentiometer

5. User defined high and low voltage range: DC8-100V

6. Measurement of ternary lithium battery L from L03 series to L20 series power off memory

7. Lead acid battery P measurement: DC12V, 36V, 48V, 60V72V, 84V power off memory

8. Measurement of lithium iron battery F from F03 to F23 power off memory

Product s:

Voltage range: DC8-80V

Working current: ≤ 15MA

Display mode: LCD screen

Display color: blue/white/color optional

Performance index:

accuracy: ± 1%

Opening size: 58.5 * 28.5MM

Refresh speed: 500ms/time

Boundary dimension: 61.3 * 33.3 * 13.5MM

Packing list:

1 x Battery Capacity Indicator

1 x Cable Leads

Model specification

press the upper right corner on on the home screen for 2 seconds to enter the mode Settings page, and press the upper right corner on for another 2 seconds to exit the Settings page and return to the home screen

Mode 1 - Lead acid P setting;

Mode 2 - ternary lithium L setting;

Mode 3 - Lithium iron F setting;

Mode 4 -- Custom high and low voltage Settings: Custom low voltage and saturation voltage,

display 00.0 000, left di is the low voltage , right

The number is the saturation voltage ;

Mode 5-- backlight setting: Display 5-B, short press the on in the lower right corner to

switch ON/OFF, ON is to automatically turn OFF the backlight after 10S delay, OFF is

The backlight is always on;

Mode 6- low voltage alarm Settings: display 00.0V Lo, the left is the alarm voltage

voltage below this alarm;

Mode 7-- alarm sound setting: Display 7-A, short press the on in the lower right corner to

switch ON/OFF, ON is to open the alarm sound function, OFF is to shut downAlarm sound function this function needs to be selected when purchased

Note: there are two kinds of lithium batteries ternary lithium L and iron lithium F, teach you to distinguish;First charge the battery first, a string of three yuan lithium batteryThe saturation voltage is DC4.2V, and the saturation voltage of lithium iron battery is DC3.6V.For example: saturation voltage shows 84V 20 strings, this one

It is a ternary lithium battery, and then select s according to the setting mode of ternary lithium battery

Settings

Lead-acid battery

In the lead-acid battery setting page, the voltage value flickers, short press the on in the lower right corner to select the battery voltage that needs to be used, after selecting the voltage, the short.

Ternary lithium

In the ternary lithium battery setting page, the number of battery strings is fing, and the number of battery strings to be used is selected by pressing the on in the lower right corner. After selecting the number of battery strings, press the on in the upper right corner to confirm and save the value the number of battery strings is always bright , press the on in the upper right corner for 2 seconds to return to the main page, or press the on in the upper right corner for other mode settings.

iron lithium battery

In the ternary lithium battery setting page, the number of battery strings is fing, and the number of battery strings to be used is selected by pressing the on in the lower right corner. After selecting the number of battery strings, press the on in the upper right corner to confirm and save the value the number of battery strings is always bright , press the on in the upper right corner for 2 seconds to return to the main page, or press the on in the upper right corner for other mode settings. Lithium iron battery

Custom high and low voltage settings

On the user-defined high and low voltage setting page, 00.0 on the left side is low voltage, 000 on the right side is saturated voltage. Short press the key at the lower right corner to set the bit value. After the bit value is set, press the key at the lower right corner for 2 seconds to shift. After the low voltage and saturated voltage are set, short press the key at the upper right corner to confirm and save the value all values are always on, press the key at the upper right corner for 2 seconds to return to the main page, You can also press the key on the upper right corner briefly to set other modes.

Tip : the right side of 000 is actually 00.0, such as 255 shows is 25.5

Display backlight settings

On the backlight setting page, ON/OFF fes. Briefly press the on at the bottom right corner to select ON or OFF. ON: The display automatically closes after a 10 second delay. OFF: The display is always on. Briefly press the on at the top right corner to confirm and save the options. press the on at the top right corner for 2 seconds to return to the main page. You can also briefly press the on at the top right corner to set other modes.

Low voltage alarm settings

On the low voltage alarm setting page, 00.0 on the left is the setting value. Short press the key at the lower right corner to set the bit value. After the bit value is set, press the key at the lower right corner for 2 seconds to shift. After the alarm voltage is set, short press the key at the upper right corner to confirm and save the value all values are always on. press the key at the upper right corner for 2 seconds to return to the main page, or short press the key at the upper right corner to set other modes.

Note : If the user does not customize the low voltage alarm s, the product default power is less than 10 % automatic alarm prompt.

Alarm sound setting

On the alarm sound setting page, ON/OFF fes, short press the on at the lower right corner to select ON or OFF, ON: turn on the alarm sound, OFF: turn off the alarm sound, short press the on at the upper right corner to confirm and save the options, press the on at the upper right corner for 2 seconds to return to the main page, or short press the on at the upper right corner to set other modes.

Note : This product is a patent product of our company, please do not imitate, imitation must be investigated.