LED Breathing Light DIY Kit Simulated Firefly Fing Toy Posensitive R Mobile Part Electronic

Introduction:

1). SFT-Q03YH is a Photosensitive Mobile Simulation Firefly Electronic DIY Kit.

2). It can simulate the automatic fing of fireflies, and according to the photosensitive r, it can automatically move towards the light at night.

3). It is a very interesting Mini DIY electronic product, which enables kids to understand the circuit more clearly and learn welding skills.

Function:

1. Manual welding:

This product is a kit, you need to weld it yourself. After completion, it will be a unique artwork.

2.Sensitive movement:

There are two photosensitive rs on right and left (R1/R4) which simulating the antennae of fireflies. When the light reaches the antennae R1 or R4, Transistor Q1 or Q2 will turn ON, and then the corresponding motor starts to so that the firefly moves in the direction of light.

3.Breathing light:

The breathing lamp circuit is controlled by lm358 ch, which can simulate the effect of fireflies' slow ON and OFF.

4.Blue potentiometer

Used to adjust the sensitivity of the blue LED light; control the blinking frequency of the breathing light. Imitate the f effect of fireflies

5.High-quality photosensitive r

The light-sensitive r is covered with a heat-shrinkable tube to help gather the light, so that the fireflies can better condense the light and move

6.on battery powered

on batteries are not included, customers need to purchase matching on batteries by thees

Feature:

1).Photosensitive automatic movement

2).Breathing light fes automatically

3).Perfect simple circuit

4).DIY hand

5).High simulation firefly

Installation Ts

1>. The user needs to prepare the welding tool first.

2>. Please be patient until the installation is complete.

3>. The package is a DIY kit. It need finish installing by the user.

4>. The iron can't touch the components for a long time(1.0 seconds), otherwise, it will damage the components.

5>. Pay attention to the positive and negative of the components.

6>. Strictly prohibit short circuits.

7>. The user must install the LED according to the specified rules. Otherwise, some LEDs will not light.

8>. Install complex components preferentially.

9>. Make sure all components are in the right direction and right place.

10>. Check that all of the LEDs can be illuminated.

11>. It is strongly recommended to read the installation manual before starting installation!!!

12>. Please wear anti-static gloves or anti-static wristbands when installing electronic components.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.