Light Cube DIY Kit RGB LED 51 MCU Electronic Charging Colorful Music 3D Animation Ornament With E Control For

WHAT IS THIS? This is a light cube DIY kit that you need to weld and aemble by yourself. The 64 LED lights make up a stereo space. A variety of cool model showing a 3D effect.It's better to watch in the night. Manual Download : http://attach01.o-us-west-1.aliyuncs.com/IC/DIY-Manual/14091.pdf Parameter: 1>.Model:3D4 Light Cube 2>.Work Voltage:DC 4.5V-5.5V 3>.Work Current:100mA 4>.Power Type:MINI USB 5>.Control Type:Infrared e Control + on Control 6>.Music Type:Pure Music 7>.Music: 11kinds(Can not be modified) 8>.Work Temperature:-40℃~85℃ 9>.Work Humidity:0%~95%RH 10>.Size(Installed):84*67*100mm Function: 1>.RGB LED light color changes automatically 2>.Automatic music playback 3>.11kinds pure music 4>.Switch memory function 5>.Music switch control 6>.Infrared e control 7>.Adjustable fing speed

Installation Notes (Please be patient ! !)

For more details, Please refer to our online PDF Installation Manual on Technical Specification.

1>.User needs to prepare the welding tool at first.

2>.The package is DIY kit.It need finish install by user.

3>.The iron can't touch the components for a long time(1.0 second), otherwise it will damage the components.

4>.Pay attention to the positive and negative of the components.

5>.Users can complete installation by silk screen and component listing.

6>.User must install the LED according to the specified rules.Otherwise some LED will not light.

7>.Install complex components preferentially.

8>.Make sure all components are in right direction and right place. 9>.It is strongly recommended to read the installation manual before starting installation.

Application

1>.Training welding skill

2>.Student school

3>.DIY production

4>.Project Design

5>.Electronic competition

6>.Gift giving

7>.Crafts collection

8>.Home decoration

9>.Souvenir collection

Exercise children's hands-on ability and concentration

Installation Steps(Please be patient install! !) Step 1: Installing the control board.Install 1pcs MINI USB.Note: the pin pitch is small, do not short circuit!And pay attention to the component mounting surface on and do not install components in re on side. Step 2: Install 4pcs 5mm RGB LED at four corners.Note: Distinguish between the positive and negative of the LED. Long pin is positive. Step 3: Install 1pcs D-40 IC socket.Pay attention to its install direction. Step 4: Install 2pcs Tact Switch black on. Step 5: Install 1pcs Self-Locking Switch red on. Step 6: Install 1pcs 220uf Electrolytic .Note: Distinguish between the positive and negative. Long pin is positive. Step 7: Install 1pcs .Note: Distinguish between the positive and negative. There is a mark ‘+’ on and . Step 8: Install 1pcs VS1838B Infrared Receiver on another side of .Please do not install it on the same side as other components. Step 9: Install 1pcs MCU .Pay attention to its install direction. Step 10: Test.Connect work voltage by USB cable and MINI USB socket.Then turn ON red power supply switch. 10.1>.Power ON is normal and the MCU is normal if 4pcs LED fing at four corners. 10.2>. and left black on is normal if playing music when pre left black on. 10.3>.Right black on is normal if play music changes when pre right black on. 10.4>.e control and Infrared Receiver are normal if play music changes when pre NEXT on. 10.5>.Fault and solution: 10.5.1>.Music is normal but LED can not turn ON means LED installation error. 10.5.2>.LED is normal but music can not play means or IC socket installation error.Or user needs to pre the left black on multle times. 10.5.3>.LED can not turn ON or weak light and music can not play means MCU installation error. Step 11: Learn about LED installation acrylic templates. The biggest hole is used to install 5mm LED and the smaller hole is used to install 3mm LED. This kit uses 3mm LED. Step 12: Install Bracket for acrylic templates by 4pcs M3*6mm Screw and 4pcs M3*12mm Copper Column. Step 13: Proceing LED pin. 90°bent short pin and the 90°bend long pin.But they bend in different directions and positions. Step 14: Place LED on acrylic templates.The short pins of the LED are connected to each other and the long pins are connected to each other. Step 15: Place 4*4 LED on acrylic templates.Make sure that the positive and negative of LED must not be wrong. Step 16: Fixed all pins.All LEDs are aligned, pay attention to beauty. Step 17: Test LED by to make sure every LED can turn ON.If there is an LED that is not lit, please update the replacement LED. Step 18: Install and test other 3pcs 4*4 LED dot matrix in the same method. Step 19: Install Bracket by 4pcs M3*6mm Screw and 4pcs M3*12mm Copper Column which form acrylic templates. Step 20: Bend the negative pole of a 1pcs 4*4 LED dot matrix and bend it 90° inward.Note: Do not short circuit to other pins.And do not damage the solder joint when bending. Step 21: Mount the long pins(positive) of the 4*4 LED on the where marked ‘B’. LED head facing to the on.Pay attention to keep the height of the LED consistent and do not tilt. Step 22: Install 1pcs 4*4 LED dot matrix next to the previous ones.But this 4*4 LED dot matrix no need Bend the negative pins.Pay attention to keep the height of the LED consistent and do not tilt. Step 23: Connect and fixed negative pins from 2pcs 4*4 LED dot matrix.Cut off the extra pins. Step 24: Connect each layer by white cable on mark 1~4.The bottom is the first layer.First fixed connection point on ring.Then confirm the length of the wire, then cut the wire.Finally fixed on the . Step 25:Fixed connect wire for each layer. Step 26: Bend the negative pole of a 1pcs 4*4 LED dot matrix and bend it 90° inward.Note: Do not short circuit to other pins.And do not damage the solder joint when bending as same to Step 20.Install it next to the previous ones.Pay attention to keep the height of the LED consistent and do not tilt. Step 27: Install 1pcs 4*4 LED dot matrix next to the previous ones.But this 4*4 LED dot matrix no need Bend the negative pins.Pay attention to keep the height of the LED consistent and do not tilt as same to Step 22. Step 28: Connect and fixed negative pins from 2pcs 4*4 LED dot matrix.Cut off the extra pins as same to Step 23 and cut off the extra pins. Step 29: Connect each layer by white cable on mark 1~4.The bottom is the first layer.First fixed connection point on ring.Then confirm the length of the wire, then cut the wire.Finally fixed on the as same to Step 24. Step 30: Test and finish installation and enjoy.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.