Lii402 Smart Charger USB Output For A AA AAA 18650 26650 26500 SC Size

Specifications:
Model:lii-402
Colors:Black
Material:ABS
Size:112mm/4.41" x 90mm/3.54" x 30mm/1.18" (L x W x H)
[Conversion: 1mm=0.03937 inch, 1inch=25.4 mm
Input : Micro USB 5V/2A
Output: 1.48V/4.20V/3.65V/4.35V
Current: 2000mA*1,1000mA*2, 700mA*3, 500mA*4
Constant voltage, cut-off current: less than 100mAh
Standby current: less than 15mAh
Compatible with (18650, 26650, 26500, 22650, 18490, 17670, 17500, 17355, 16340, 14500, 10440, A, AA, AAA, SC sizes)

Features:
1. Micro USB 5V input, four independent charging and micro computer management system
2. Four charging current mode (500mAh/700mAhn/1000mAh/2000mAh), 2000mAh current mode is fixed on the fourth slot
3. The LED indicators display the charging progress: 25% - 50% - 75% -100% and type (size): Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.85V
4. Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.85V li-ion batteries
5. Refresh for OV . It don’t charge any of1.65 -1.85V (refresh current can be detected )
6. Protection for over-charge and over-discharge and short circuit. Identify broken and polar inspection
7. Charing under constant voltage and current
8. Input by interface and working voltage is 5V-2A (Micro plug)
9. Built with 5V/1000mAh USB discharge (output) function


Button, LED and function
1. Buttons : While electricity is connected, 1) press the button to change the type, it will start to charge 5 seconds after setting the type (3.2V or 3.85V), 1.2V Ni-MH and 3.7V li-ion ca be detected automatically, so it need set for 3.2V and 3.8V batteries; 2) change the charging current amount 4 current at any time during charging by long press the button
2. LED: While connect it to 5V input, all LED light up immediately 1) If no is put in, 500mAh LED keeps on and others will go out. 2) When is detected in, 4 LED lights on AND 3.7V LED keep flicker to indicate to set the type, if no operation, it begin to charge 5 seconds later automatically under , four LED lights will display the charging status. 3) Tap the button .can show the type for 5 seconds. 4) No electricity is connected, insert a can quick the remaining volume.
3. USB output indicator: When USB discharging port detected, indicator of volume will light up for 10 seconds and go out, press button to light up again.

USB Output function
1. 0pen-circuit voltage of USB output : 4.9-5.3V; and the 4th slot is fixed for the USB discharge source
2. Output current: 1000mAh
3. Open circuit current: 1mAh
4. The corresponding voltage is 4.75-5.25V under 1000mAh current
5. Cut-off voltage for discharge protection: 3.0±0.1V

Package Included:
1 x Charger
1 x USB Data Cable
1 x User Manual

Note:
-Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
-Please allow 1-3MM differs due to manual measurement.
-Due to the different display and different light, the picture may not reflect the actual of the item. Thanks for your understanding.



a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a