Lithium Battery Internal Resistance Test High Accuracy Fast Instrument 100V Electric Vehicle Group 18650

YR1035 battery internal resistance is a true four-wire internal resistance , which can test internal resistance and voltage value at the same time, and can also be used for resistance measurement. The measurement results are displayed on the same screen. This product is suitable for battery matching, battery performance testing, battery screening, etc. The hine has a compact structure and is easy to carry. It is your perfect electrician and electronic testing hine.

Features:

True 4-wire AC sinusoidal measurements effectively refrain the effects of test leads and contact resistance.

Two function interfaces, battery sorting function.

Built-in battery, phone recharger charging, low power consumption + multle power saving options.

The test range is up to 200 ohms with a minimum resolution of 0.01 milliohms and le than 5 milliohms.

Pre HOLD to enable the ZR function to measure internal resistance as low as 0.30-0.50 milliohms.

Handmade, the appearance of the right side is overly cautious.

True four-wire 1KHz AC sinusoidal battery internal resistance meter 0.00001 ohms-200 range.

It can measure plumbic , lithium ion, lithium polymer, lithium iron phosphate, alkaline, dry battery, nickel hydrogen, nickel cadmium, on battery, etc.

The ZR function measures below 5 ohms, and the internal resistance is more accurate.

Specifications:

Material: ABS

Color: black

Battery: 1 * lithium battery, 2000mAh (included)

Accuracy format: ±([accuracy percentage]+[least significant digit])

Range: 20mΩ/200mΩ/2Ω/20Ω/200Ω

Maximum resolution: 0.01mΩ/0.1mΩ/1mΩ/10mΩ/0.1Ω

Accuracy: 0.7%+7/0.5%+5/0.5%+5/0.5%+5/0.6%+5

Display mode: 22.00mΩ (when ZR function is enabled)/220.0mΩ/2.200Ω/22.00Ω/220.0Ω

In the range of 5%-95% of the gear, when it is not within this range (le than 5% of the range of the gear range, or greater than 95% of the range of the gear range), the error may be greater than the above accuracy.

Voltage measurement: ±(% reading +% range)

Range: 1V/10V/100V

Maximum resolution: 0.00001V/0.0001V/0.001V

Accuracy: 0.15+0.015/0.15+0.010/0.15+0.015

Display mode: .99999V/9.9999V/99.999V

Positive and negative symmetry error ±(0.012%+5 words)

Temperature drift within normal use temperature (10℃-40℃) 100ppm/℃

Maximum voltage between any terminals: 100V

Display: internal resistance figures: 2000 counts Voltage figures: 99999 counts update 4 times per second

YR1030+：

True 4-wire AC sine measurement, to effectively avoids the impact of test lines and contact resistance. Two functions interface, the old battery sorting function, low power consumption and a variety of power-saving options. Test range up to 200 ohms with a minimum resolution of 0.01 milliohms and le than 5 milliohms. Pre HOLD to enable the ZR function to measure internal resistance as low as 0.30-0. 50 milliohms. Features: Voltage resistance with the screen at the same time measurement, measurement quickly and steadily. The minimum resolution of up to 0.01 milliohms, easy to test large capacity, high discharge rate low resistance battery. Range can be 200 ohms, can be measured on batteries, 9V laminated battery and other low-capacity small current high internal resistance battery. Voltage, internal resistance test function, respectively, with manual automatic range function. Automatic range switch stable and quick, the measurement shows 4 times per second update, the basic can be locked in about 1S time range stable display. HOLD function to help you lock the display, more convenient reading. Using dot matrix LCD screen. Size font combination, which clearly shows the measurement results, but also display rich content. 2 kinds of display mode. Normal mode with the screen display resistance and voltage, sorting mode shows the interna resistance voltage and the level of battery claification and counting. Has a three-level battery rating detection. By setting the voltage resistance rating, the battery can be grouped. Built-in charging management circuit. And can be set to 200mA and 400mA two charging current. Energy saving function. Can be set 5 - 60min shutdown delay. No operation and input, the ultra-delayed automatic shutdown. Can be set to 5-30min delay into low power mode. Specifications: Material: plastics Voltage measuring range: 0-28V Internal resistancemeasuring range: 0-200Ω Battery: 3.7V, 2000mAh Package size: 120 * 60 * 40mm / 4.7 * 2.4 * 1.6in Package weight: 300g / 10.6ounce Packing List: 1 * Internal Resistance Test Instrument

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.