Mega328 LCD Digital Transistor LCR-T4 Balight Diode Triode Capacitance Digital LCD Meter MOS/PNP/NPN/JFET

LCR-T4 Mega328 M328 LCD Screen Digital Transistor Meter Balight Diode Triode Capacitance Meter MOS/PNP/NPN/JFET Fea tures :

1,The latest M328 version of the ,more functions.Ch: Atmega328

2.128*64 big Balight LCD display,only 2mA when stand by.

3,Using 9V battery (Not included)

Type:

1.with test hook

2.without test hook

Test ranges:

Inductors, s , diodes, dual diode , mos, transistor, SCR , the regulator, LED tube ,

Resistance,Adjustable potentiometer

Resistance :0.1 ohm resolution, maximum 50M ohm

:25pf -100,000 uf

Inductors : 0.01mh-20H

Function:

1:Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET,

diode (including double diode), thyristor, transistor, and and other components

2: Automatic test the pin of a component, and display on the LCD

3:Can detect the transistor, MOSFET protection diode amplification coefficient

and the base to determine the emitter transistor forward biased voltage

4: Measure the gate and gate capacitance of the MOSFET threshold voltage

5:Use 12864 liquid crystal display with green balight

Specifications: For you reference

1,One -button operation, automatic shutdown .

2,Only 20nA shutdown current.

3,Automatically detect NPN, PNP bolar transistors , N -channel and P -channel MOS FET,

JFET , diodes , two diodes, thyristors small power unidirectional and bidirectional thyristor.

4,Automatic identification components pin arrangement .

5,Measuring bolar transistor current amplification factor and base - emitter threshold voltage.

6,Via the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors.

7,Can detect bolar transistors and MOS transistors protection diodes.

8,Measuring the gate MOS FET threshold voltage and the gate capacitance.

9,Can simultaneously measure two s and symbol is displayed.

Displayed on the right with a decimal value of 4 .

Resistance symbol on both sides shows the pin number.

So you can measure the potentiometer.

If the potentiometer wer is not transferred to an extreme position ,

we can distinguish the middle and both ends of the pin.

10,Resistance measurement resolution is 0.1 ohms , 50M ohms can be measured .

11,Can measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF.

12.2uF more s can simultaneously measure the equivalent series resistance values.

The two can be displayed with a decimal value , resolution 0.01 ohms.

13,Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage.

14.LED is detected as a diode forward voltage higher . Combo of the LED is identified as two diodes.

15,Ee breakdown voltage is le than 4.5V Zener diode can be identified.

16,Can measure a single diode re capacitance.

If the bolar transistor connected to the base and collector or emitter of a pin ,

it can measure the collector or emitter junction re capacitance .

18.can be obtained with a single measurement rectifier bridge connection.

Notice:

Before measuring capacitance , the must be discharged , otherwise very likely damage the meter .The screen is not fixed

Paage Included:

1PCS * Mega328 Transistor

About shping
Shping and Pa All itwill be double cheed and well paed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the paage to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedba, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at cheout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbaYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedba for the transaction.