meter P21 4x4 Inclinometer Gradient HUD Auto Accessories Real~Time Off~road Vehicle System Car Level r

Features:

Display the driving data such as speed, speed, consumption, water temperature, voltage, etc. on the front windshield to avoid the insecurity caused by the driver looking at the instrument while driving. The driver can read the driving information in real time and keep the HUD in the best condition at any time.

This product is a dual system: ar power on, choose theguage you are familiar with, choose the or system, and automatically enter the last selected system ar 5 seconds of no operation.

11 large interface functions, you can switch at will.

A variety of operating interface modes and colors can be switched freely, bringing you more fun and a sense of technology.

Specificaitons：

Color: Black

Product size: as shown

Material:ABS+PC

Working voltage: 11V~18Vdc (12Vdc/200mA)

Photosensitive components: automatically adjust the brightne with the surrounding envment

Language: CN Simplified Chinese / TW ditional Chinese / EN English, etc.

Setting Modes:

System Sound Settings: ON to turn on the alarm sound / OFF to turn off the alarm sound

Speeding reminder: alarm when the vehicle speed reaches the set default value of 150km/h, the setting range is 5-200km/h

Engine temperature alarm: alarm when the water temperature reaches the set default value of 120°C, the setting range is 50-200

Engine speed alarm: alarm when the speed reaches the default value of 6000r/min, the setting range is 1000-8000

Voltage alarm setting: alarm ar the voltage is lower than the set default value of 10.5v, the setting range is 10.0-15.0v

Speed error adjustment: adjust the value when there is an error between the speed and the instrument panel (for example, the instrument displays 100 Km/h, the device displays Km/h, and the dial wheel is turned up to adjust the value to 102)

Speed zero setting: when the vehicle speed does not return to 0 ar the car is turned off (for example, the vehicle speed displays 5Km/h and the device is adjusted to 6Km/h)

Voltage error adjustment: when there is an error between the voltage and the instrument panel voltage, fine-tuning can be done (for example, when the device displays 0.2V higher than the instrument voltage, the device is adjusted to 98%)

Engine dispment setting: When the consumption error is large, adjust it according to the dispment (for example, if the dispment of the car is 3.6L, adjust the value to 3.6L)

Adjustment of consumption data: fine-tuning when there is an error in consumption (for example, when the device shows 0.2L higher than the meter voltage, the device is adjusted to 98%)Backlight brightne setting: Auto auto-sensitivity, 1 is the darkest, 8 is the brightest

Ambient light settings: RPM speed control color-changing ambient light SPEED speed control color-changing ambient light

OFFTurn off the mood light BLUE blue mood light RED red mood light PURPLE purple mood light

Shutdown delay setting: the default is 10 seconds to shut down, the adjustment range is 5-300 seconds

Shutdown voltage setting: adjust to 13.2V or 13.6 when it cannot be turned off, and adjust to COM mode for cars that automatically start and stop

Restore factory settings: The system is restored to the factory default value Ar selecting this operation, short pre the M key to confirm

Calibration of the incline meter: short pre the or on ar the meter is pd: when you hear the beep, the calibration is complete

Enter the setting mode: pre the M key for 2 seconds to enter the setting item, short pre to select the menu, short pre the M key to confirm, ar adjustment, pre the M key for 2 seconds to save and exit

Operate:1. Left ambient light: change with engine speed or vehicle speed (setting it can be selected)2. Power on: pre for 2 seconds to turn off, pre again for 2 seconds to turn on3. Left on: short pre to switch the display on the left, enter the setting and then move the option, and short pre the calibration on the display interface of the incline meter4. Right on: switch the display on the right, and move the options ar entering the setting5. M key: short pre (pre once) to switch the display mode, enter the setting menu to confirm the optionpre (pre and hold for 2 seconds) to enter the setting, ar adjustment, pre and hold for 2 seconds to save and exit6. Right ambient light: change with engine speed or vehicle speed (setting it can be selected)Package Included:

1 x Host

1 x Cable

1 x Bracket

1 x Non-sl Pad

1 x Manual

NOTE:If you don’t drive for more than a week, please disconnect the connection. Since the device is a normally charged car battery, the theoretical standby is 1 month. Due to different vehicle conditions, it is recommended to unplug the device when the car is not used for a time.