meter/Odometer+Throttle/Accelerator with Lcd Display 36v48v60v &Cruise Switch Electric Scooter Bike MTB Tricycle DIY Part

meter/odometer+throttle/accelerator with lcd display 36v48v60v &cruise switch electric scooter bike MTB tricycle DIY part

price is for one group of throttle ，include left and right part

product descrtion, specification

materials :blue lcd display,+rubber grs+aluminum shell grs,, EACH batch OF goods maybe have different grs, please be noted, this will not influence the function of throttle,. wire length 1.65m install on handlebar of electric bike or scooter, install handlebar diameter 22mm see bellow is size

INDICATION

it indicate speed battery level single tr odometer

SETTING OF DISPLAY

pre M on you can see the odometer and battery voltage, ( SOME FUNCTION WORK ONLY WHEN THIS DISPLAY HAS COMMUNICATION, IF COMMON PHASE WIRE SIGNAL SOME SETTING IS NOT AVAILABLE ） setting of display pre M on and at same time open power lock, now display lights and numbers shines, and pre m on you will can set the display . short pre M on you can switch the setting item, long pre it you can set the data bellow p01=voltage, 36v,48v,60v, default setting 48v, p02=speed ratio=0.2-1.5, default setting =1, real speed / current speed is the ratio u should set, for 36V bike when phase wire voltage is 18V , default setting speed = 30km/h for 48V bike when phase wire voltage is 24V , default setting speed = 35km/h for 60V bike when phase wire voltage is 30V , default setting speed = 40km/h p03=range ratio=1-1.3, default setting =1 p04=speed testing mode, 1=VOL, phase voltage speed testing, , 2=hall, hall speed testing, default setting it is 1 if phase wire voltage signal, the rim and ic poles setting will not work. p05= rim size , 8inch, 10, 14,16,18,20,22,24,26,28,29inch(can work with phase voltage speed testing), default setting 14inch, p06= ics poles number (if motor with external speed testing hall built outside, it =1, means only has single piece ic poles, usually it is 1-6 if motor has speed testing hall built inside, now it means ic poles pieces numbers. it is 10-30pairs, it motor takes phase wire voltage speed testing, this will not work) default setting =1 , pre on will add one p07, mile/h or km/h, 1=metric, 2=mile, default setting it =1 or it is P07 battery voltage ratio P08 =0, 3 gears function is forbidden, p08=1 means 3 gears available and power on it is gear one, short pre M on will exchange gears, long pre M on will switch betteen single tr/odo, and battery voltage, p08=2 means power on it is gear 2. p08=3 means power on it is gear 3. P09 aculated odo clear to zero , long pre on >3seconds, odo shines, then short pre>10times, the odo will be cleared to zero, P10 mile/km exchange, 1=km, 2=mile, different version of goods has different setting , please contact s peron. long pre M on for 3 seconds you can confirm and store this data that you have set, and switch to next. repower display again you will can use new setting,

WIRING INSTRUCTION

wiring instruction for lock model, black blue red--throttle wire -connect with controller throttle wire, (red is +5v, black is negative, blue is throttle signal wire, ) brown --speed wire --default setting connect with any phase wire of motor phase wire this wire will supply signal for display, if donot connect, display will not indicate speed and odometer. (this throttle takes phase voltage signal , ) for cruise model yellow +white is cruise wire, green wire is positive, --connect with battery positive.

attention please:

1. for all the display which takes phase wire voltage signal, the speed indication will have little deviation, 2. if your motor is brushle gear motor, when sliding the speed indication may be zero. if brushle gearle motor, this phenomemon will not happen,

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.