Meter/Odometer+Throttle+Lcd Display36v48v60v+Lock/Cruise+Battery Indicator Electric Scooter Bike MTB Tricycle DIY Part

meter/Odometer+Throttle+Lcd Display36v48v60v+Lock/Cruise+Battery Indicator Electric Scooter Bike MTB Tricycle DIY Part

materials :blue lcd display,+rubber grs+aluminum shell grs,, EACH batch OF goods maybe have different grs, please be noted, this will not influence the function of throttle,. it can be with lock/key or with cruise switch , when place order please make clear which you choose, we will sh according to your choice, please donot make wrong choice

it indicate

speed

battery level

single tr

odometer

pre M on you can see the odometer and battery voltage

wire length 1.65m

see bellow is size

setting of display

pre M on and at same time open power lock, now display lights and numbers shines, and pre m on you will can set the display .  short pre M on you can switch the setting item, long pre it you can set the data bellow

p01=voltage, 36v,48v,60v, default setting 48v,

p02=speed ratio=0.2-1.5, default setting =1,

real speed / current speed is the ratio u should set,

for 36V bike

when phase wire voltage is  18V ,  default setting speed = 30km/h

for 48V bike

when phase wire voltage is  24V ,  default setting speed = 35km/h

for 60V bike

when phase wire voltage is  30V ,  default setting speed = 40km/h

p03=range ratio=1-1.3, default setting =1

p04=speed testing mode,

1=VOL, phase voltage speed testing,  ,  2=hall, hall speed testing, default setting it is 1

if phase wire voltage signal, the rim and ic poles setting will not work.

p05= rim size , 8inch, 10, 14,16,18,20,22,24,26,28,29inch(can work with phase voltage speed testing), default setting 14inch,

p06= ics poles number (if motor with external speed testing hall built outside, it =1, means only has single piece ic poles, usually it is 1-6

if motor has speed testing hall built inside, now it means ic poles pieces numbers. it is 10-30pairs, it motor takes phase wire voltage speed testing, this will not work)

default setting =1 , pre on will add one

p07, mile/h or km/h,  1=metric, 2=mile, default setting it =1

or it i

P07 battery voltage ratio

P08 =0, 3 gears function is forbidden,

p08=1  means 3 gears available and power on it is gear one,

short pre M on will exchange gears, long pre M on will switch betteen single tr/odo, and battery voltage,

p08=2 means power on it is gear 2.

p08=3 means power on it is gear 3.

P09 aculated odo clear to zero , long pre on >3seconds, odo shines, then short pre>10times, the odo will be cleared to zero, P10 mile/km exchange, 1=km, 2=mile, different version of goods has different setting , please contact s peron.

long pre M on for 3 seconds you can confirm and store this data that you have set, and switch to next. repower display again you will can use new setting,

it has 3  model customer can choose from

lock model or cruise switch model or on-off switch model

order model with on-off switch here

https://www.aliexpre.com/item/33054337488.html?storeId=2855084&spm=2114.12010615.8148356.2.b7104390xoydU9

wiring instruction for lock model,

black blue red--throttle wire -connect with controller throttle wire,

(red is +5v, black is negative, blue is throttle signal wire, )

yellow+white=eletric switch wire

yellow --electric switch wire input positive

white --throttle output positive

brown --speed wire --connect with any phase wire of  motor phase wire

this wire will supply signal for display,  if donot connect, display will not indicate speed and odometer.

(this throttle takes phase voltage signal , )

for cruise model yellow +white is cruise wire, green wire is positive,  other wires are the same,

attention please :

1. for all the display which takes phase wire voltage signal, the speed indication will have little deviation,

2. if your motor is brushle gear motor, when sliding the speed indication may be zero.

if brushle gearle motor,  this phenomemon will not happen,

we may have different grs please be noted

it has 3 ways to take spee signal

1.phase wire signal, --basic one,

2.hallr signal --better speed and votlage display, more accurate

for first two kinds, please connect speed wire of display with corresponding wires of controller,

3.communication with controller,

order the group of display and controller here please

https://www.aliexpre.com/item/33036613296.html

price  is for sample , for quantity order please leave meage, we will give big discount

if need quantity order please leave meage in our store we will give discount

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.