MT10 Two Pins Digital Wood Moisture Meter 0-99.9% Wood Humidity Timber Damp Detector With Large LCD Display 40%Off

MT10 0-99.9% Two Pins Digital Wood Moisture Meter Humidity Timber Damp Detector 0.5 percent Accuracy Moisture Meter Test

Congratulations on your purchase of this Moisture Meter. This instrument is a conductivity moisture meter specifically designed for the wood industry.

The instrument has four calibration scales, enabling the user to take accurate moisture measurements in 100 wood species. Moisture measurements can be taken using the integral pin electrodes.

This meter is shped fully tested and calibrated and, with proper use, will provide years of reliable service.

1. Measurement pins

2. Low battery icon

3. LCD measurement reading

4. Hold indicator

5. Wood group designator

6. Power on-off on

7. Mode on to select wood group

8. Hold on

9. Simply descrtion of each wood group

Operation:

Caution: The electrode measurement pins are extremely sharp. Users care when handling this instrument. Cover the pins with the protective cap when the instrument is not in use.

Measurement Instructions:

1. Remove the cap to expose the needle electrodes.

2. Power ON the Instrument.

3. Select the appropriate wood calibration scale A, B, C, D (See the Wood Calibration Tables later in this guide) Using "MODE" on.

4. Push the needle pins into the wood and observe the reading.

5. Power OFF the instrument.

Auto Power OFF:

This instrument will be Auto Power OFF if there is no any on preing in 15 minutes. This design is for saving battery power consumption.

Care and Maintenance:

When the instrument is not in use, store the instrument in a stable, dust-free environment out of direct sunlight. Remove the battery from the instrument if it is to be stored for periods of more than one month, or when the low battery power symbol appears on the display.

Battery replacement

When the low battery icon appears on the display, replace the battery as soon as practical.

1. Remove the rear battery compartment cover.

2. Replace one 9V battery.

3. Cover the compartment door.

Specifications:

n  Display: Large LCD characters display

n  Measurement princle: Electrical resistance

n  Range: Wood: 0~99.9%

n  Resolution: 0.1%

n  Accuracy: ±0.5%

n  Electrode length: 10mm(0.4")

n  Electrode pins: Integrated

n  Auto Power OFF: After approx.15 minute

n  Power Supply: One 9V battery(NOT included)

n  Meter housing: ABS plastic

n  Operating Temperature: 0 to 40 (32 to 104)

n  Dimensions: 145 X 67 X 32mm (5.7" x 2.6" x 1.3")

n  Weight: 200g (7.0 oz)

Wood Species Group Table:

Wood Group

Wood Specie

A

Teak, Walnut, Afrormosia, Rubber Tree, Imbuia, Kokrodua, Niove Biala, Cork

B

Keruing, White Poplar, Beech, Cedar, Tola

C

Lauan, Ash, Elm, Fir, Maple, Padauk, Oak, Cherry

D

Bawood, Larch, Pine, Birch

About shping
Shping and Pa All it will be double cheed and well paed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the paage to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedba, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at cheout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbaYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedba for the transaction.