New Outdoor Solar Garden Lamp 100led Solar Charging All Sides Luminous Wall Lamp Infrared Sensor Lamp

 
 
HOT SALTCross-Border Recommendation 
    HOT！¥85.00

 

HOT！¥58.00

 

HOT！¥1.99

 

HOT！¥8.00




 

 

 




HOT！¥10.53

 

HOT！¥3.90

 

HOT！¥12.00

 

HOT！¥8.50




 

 

 




HOT！¥8.50

 

HOT！¥0.40

 

HOT！¥70.00

 

HOT！¥62.00




 

 

 




HOT！¥37.00

 

HOT！¥18.00

 

HOT！¥7.00

 

HOT！¥19.00




 
 
[Store Announcement]]The Prices of All Products in This Store Are Excluding Tax.If You Need to Issue an Invoice, Additional Tax Points Are Required.Contact Customer Service If Necessary
 
 
 

 

 

100 Lights Solar Four-Sided Wall Lamp Parameters:

Product Model: DZ-100LED

Led Specification: 100smd2835 0.2 W/pcs
Light Body Material: PC Abs
Solar Panel Specification: Monocrystalline Silicon 5.5V 1.43W
Battery Specification: 18650 Lithium Battery 3.7V 1200MAh with Charge and Discharge Protection
Output Power: 3.2V/7W
Charging Time: 6 Hours under the Sun
Pir Sensing Angle: 120 Degrees
Sensing Distance: 8-10 Meters

Product Size: 135*100 * 50mm
Packing Size: Cowhide Box 140*65 * 105mm, Weight 35G

Product Weight: 172G in a Single Package and 309G in Two Boxes
Packing Size: 58*34.5 * 54cm

Packing Number: 100Pcs

Gross Weight: 19/17kg
Button Lighting Mode:
1, off: Off Mode
2.1 Gear: Someone Lights up for 15-30 Seconds, and Then the Light Goes off;
3,2 Gear: Someone Lights on Strong Light for 15-30 Seconds, and Then the Light Is Always on Low Light;
4,3 Gear: There Is No One, Keep It Medium Bright.

100 Lights Solar Four-Sided Wall Lamp Advantages:

100led Solar Waterproof Four-Sided Human Body Induction Wall Light Switch Front Setting Is Easier to Operate, Energy Saving, Green Lighting, Long Service Life, Durability, Low Failure Maintenance Rate, High Radiation-Free Stability, simple Installation (Only 2 Screws Are Required to Fix the Product on the Wall Surface That Can Bask in the Sun outside), Easy to Use, Intelligent Light Induction Control, No Adjustment, Energy Saving and Convenient, make Your Home More Beautiful and Intelligent.

100 Lights Solar Four-Sided Wall Lamp Use Range:

100led Solar Waterproof Four-Side Human Body Induction Wall Lamp Is Suitable for Corridor, Garden Gate, Roof Roof, Courtyard Wall Villa, Window Shop, Home and Other Outdoor Environment, No Wiring, No Electricity Consumption, Exquisite Craftsmanship, taste.

 

 

 

1. Instructions for Use of the Switch
1. the Battery Is the Positive Pole Facing inside (the Side of the Lamp Holder), and the Negative Pole Facing outside (the Tail).
2. the Switch Is at the Tail, the Switch Function Bearing Switch Is the Switch Function, and the Light Switch Is the Dimming Function.
II. Circuit Board Instructions
1. Our Store Torch Adopts Advanced Constant Voltage and Constant Current Technology, Which Can Effectively Solve the Requirements of LED Torch for Constant Voltage and Constant Current.
2. Special Tips: A. Do Not Use It over Pressure, and the Voltage Should Not Exceed 4.2V B. The Battery Is Facing Forward, Do Not Set It in Reverse, Otherwise It Will Burn Plate C. Pay Attention to Controlling the Temperature Change of Torch to Ensure Heat Dissipation D. Do Not Open the Circuit Board for Non-Professionals.
3. Warranty Description: No Longer Covered by Warranty after Opening Or Handling the Circuit Board.
III. Lithium Battery Instructions
1. Features of Lithium Battery: the Charging Method of Lithium Battery Is Completely Different from That of Mobile Phone Battery; Lithium Battery Has No Memory, and Can Be Charged at Any Time, and Should Not Be Overcharged Or Overdischarged.
2. It Takes Less than 6 Hours to Charge, and Then It Will Be OK According to the Green Light of the Charger. It Is Not Necessary to Charge.
3. Special Tips: Use a "Three-Proof" Charger with Anti-Overcharge, Anti-Reverse Connection, and Anti-Short Circuit;
4. If You Do Not Use the Battery for a Long Time, You Should Fully Store the Power, and Charge and Discharge It Normally in about Three One Months;
IV. Instructions for Torch
1. When Using Torch, Choose According to the Requirements of Torch for Voltage and Battery. Do Not Use It Indiscriminately to Prevent the Circuit Board from Being Burnt out. Do Not Use Batteries of Different Models and Voltages at the Same Time.
2. in Use, When the Brightness of Torch Changes Significantly, Turn off Torch to Prevent Battery Overdischarge.
3. Heat Dissipation Skills: Torch Ensure Heat Dissipation during Use. When the Battery Is Fully Charged, It Is Strongly Required to Use the Second Gear First, Which Can Extend the Product Life of Torch Lamp Holder and Battery! Torch Light Cannot Be Directed Directly into People's Eyes, Which Is Super Bright and Dazzling, So as Not to Affect Eyesight, Especially Children.
V. Troubleshooting
1. Check the Battery: Make Sure That the Battery Has Electricity and the Battery Is Installed in the Correct Direction. Batteries of Different Brands Cannot Be Used. New and Old Batteries Cannot Be Mixed.
2. Check Tail Hood: Make Sure That the Switch Is Tightened and in Good Contact, Ensure That the Tail Hood Copper Cylinder Is in Good Contact with the Tail Hood Pressure Ring Metal Sheet, and Pay Attention to Whether the Lamp Holder Is Loose.