This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeAutomobileCar Electronics & AccessoriesCar Electronics AccessoriesAudio & Video AccessoriesPortable Device Car MountsNew Touch Induction Switch Air Separator River Table Light Strip Cell Coil Same Style 3V-24V Diy Coil Kit
/product/23/0717812/1.jpg?7704)
Share this product
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees UGX 24,706
Ready for pickup between 05 December & 10 December when you order within next 19hrs 55mins
Door Delivery
Delivery Fees UGX 26,706
Ready for delivery between 05 December & 10 December when you order within next 19hrs 55mins
Return Policy
Free return within 7 days for eligible items.Details
Seller Information
Fueran
60%Seller Score
Be the first to follow
Seller Performance
This seller does not have enough history for us to evaluate his performance yet
Product details
Size : --
Type : --
Style : --
Output Type : --
Model Number : --
DIY Supplies : ELECTRICAL
Origin : Mainland China
Certification : none
Features:
1.This touch sensing river table module uses high-quality materials, which are stable and reliable, easy to install, non heating, and low power consumption;
2.The sensing thickness of the barrier is about 3 centimeters, and the thinner the barrier, the higher the sensitivity. Every time you touch it, the light will cycle on in seven colors;
3.The maximum load can be connected to a light strip within a current range of 5V and 2A, which can support 12V. To use 12V power supply, a 12V light strip is required;
4.Easy to use, easy to operate, and ready to use when connected and powered on;
5.Wide application range, suitable for various materials: wood, organic glass, acrylic resin, stone, plastic cardboard, etc., not suitable for metal materials.
Parameters:
Product Name: RGB Colorful River Light Module
Trigger method: touch switch
Input voltage: DC 5V (can support 12V, 12V power supply requires 12V light strip)
Power supply interface: TYPE-C or XH2.54 3P plug
LED light supply voltage: Factory DC 5V (12V power supply, 12V light strip is used)
Maximum working current of a single module: ≤ 120mA
Size: 32mm * 21mm * 10mm
Usage:
1. First, plug the 2P touch socket into the module;
2. Connect to a 4P RGB LED socket;
3. Connect the TYPE-C or 3P XH2.54 plug again for power supply, and the LED light will light up slightly;
4. Wait for the touch to sense the highlight of the rear light, and after leaving the touch range, the light will turn off. Each touch will cycle on in seven colors.
Precautions:
The first time you use it, you must first connect the 2P touch plug, then connect the LED socket and power socket to power on. Touching requires a self check of the usage environment. If you connect the power first and then the touch plug, it may not work properly. You need to power on the self check again.
Package include:
Package 1:
1X module
Package 2:
1X module
1X coil
Package 3:
1X module
1X coil
1X light strip
Type : --
Style : --
Output Type : --
Model Number : --
DIY Supplies : ELECTRICAL
Origin : Mainland China
Certification : none
Features:
1.This touch sensing river table module uses high-quality materials, which are stable and reliable, easy to install, non heating, and low power consumption;
2.The sensing thickness of the barrier is about 3 centimeters, and the thinner the barrier, the higher the sensitivity. Every time you touch it, the light will cycle on in seven colors;
3.The maximum load can be connected to a light strip within a current range of 5V and 2A, which can support 12V. To use 12V power supply, a 12V light strip is required;
4.Easy to use, easy to operate, and ready to use when connected and powered on;
5.Wide application range, suitable for various materials: wood, organic glass, acrylic resin, stone, plastic cardboard, etc., not suitable for metal materials.
Parameters:
Product Name: RGB Colorful River Light Module
Trigger method: touch switch
Input voltage: DC 5V (can support 12V, 12V power supply requires 12V light strip)
Power supply interface: TYPE-C or XH2.54 3P plug
LED light supply voltage: Factory DC 5V (12V power supply, 12V light strip is used)
Maximum working current of a single module: ≤ 120mA
Size: 32mm * 21mm * 10mm
Usage:
1. First, plug the 2P touch socket into the module;
2. Connect to a 4P RGB LED socket;
3. Connect the TYPE-C or 3P XH2.54 plug again for power supply, and the LED light will light up slightly;
4. Wait for the touch to sense the highlight of the rear light, and after leaving the touch range, the light will turn off. Each touch will cycle on in seven colors.
Precautions:
The first time you use it, you must first connect the 2P touch plug, then connect the LED socket and power socket to power on. Touching requires a self check of the usage environment. If you connect the power first and then the touch plug, it may not work properly. You need to power on the self check again.
Package include:
Package 1:
1X module
Package 2:
1X module
1X coil
Package 3:
1X module
1X coil
1X light strip
Specifications
Key Features
Size : --
Type : --
Style : --
Output Type : --
Model Number : --
DIY Supplies : ELECTRICAL
Origin : Mainland China
Certification : none
Features:
1.This touch sensing river table module uses high-quality materials, which are stable and reliable, easy to install, non heating, and low power consumption;
2.The sensing thickness of the barrier is about 3 centimeters, and the thinner the barrier, the higher the sensitivity. Every time you touch it, the light will cycle on in seven colors;
3.The maximum load can be connected to a light strip within a current range of 5V and 2A, which can support 12V. To use 12V power supply, a 12V light strip is required;
4.Easy to use, easy to operate, and ready to use when connected and powered on;
5.Wide application range, suitable for various materials: wood, organic glass, acrylic resin, stone, plastic cardboard, etc., not suitable for metal materials.
Parameters:
Product Name: RGB Colorful River Light Module
Trigger method: touch switch
Input voltage: DC 5V (can support 12V, 12V power supply requires 12V light strip)
Power supply interface: TYPE-C or XH2.54 3P plug
LED light supply voltage: Factory DC 5V (12V power supply, 12V light strip is used)
Maximum working current of a single module: ≤ 120mA
Size: 32mm * 21mm * 10mm
Usage:
1. First, plug the 2P touch socket into the module;
2. Connect to a 4P RGB LED socket;
3. Connect the TYPE-C or 3P XH2.54 plug again for power supply, and the LED light will light up slightly;
4. Wait for the touch to sense the highlight of the rear light, and after leaving the touch range, the light will turn off. Each touch will cycle on in seven colors.
Precautions:
The first time you use it, you must first connect the 2P touch plug, then connect the LED socket and power socket to power on. Touching requires a self check of the usage environment. If you connect the power first and then the touch plug, it may not work properly. You need to power on the self check again.
Package include:
Package 1:
1X module
Package 2:
1X module
1X coil
Package 3:
1X module
1X coil
1X light strip
Type : --
Style : --
Output Type : --
Model Number : --
DIY Supplies : ELECTRICAL
Origin : Mainland China
Certification : none
Features:
1.This touch sensing river table module uses high-quality materials, which are stable and reliable, easy to install, non heating, and low power consumption;
2.The sensing thickness of the barrier is about 3 centimeters, and the thinner the barrier, the higher the sensitivity. Every time you touch it, the light will cycle on in seven colors;
3.The maximum load can be connected to a light strip within a current range of 5V and 2A, which can support 12V. To use 12V power supply, a 12V light strip is required;
4.Easy to use, easy to operate, and ready to use when connected and powered on;
5.Wide application range, suitable for various materials: wood, organic glass, acrylic resin, stone, plastic cardboard, etc., not suitable for metal materials.
Parameters:
Product Name: RGB Colorful River Light Module
Trigger method: touch switch
Input voltage: DC 5V (can support 12V, 12V power supply requires 12V light strip)
Power supply interface: TYPE-C or XH2.54 3P plug
LED light supply voltage: Factory DC 5V (12V power supply, 12V light strip is used)
Maximum working current of a single module: ≤ 120mA
Size: 32mm * 21mm * 10mm
Usage:
1. First, plug the 2P touch socket into the module;
2. Connect to a 4P RGB LED socket;
3. Connect the TYPE-C or 3P XH2.54 plug again for power supply, and the LED light will light up slightly;
4. Wait for the touch to sense the highlight of the rear light, and after leaving the touch range, the light will turn off. Each touch will cycle on in seven colors.
Precautions:
The first time you use it, you must first connect the 2P touch plug, then connect the LED socket and power socket to power on. Touching requires a self check of the usage environment. If you connect the power first and then the touch plug, it may not work properly. You need to power on the self check again.
Package include:
Package 1:
1X module
Package 2:
1X module
1X coil
Package 3:
1X module
1X coil
1X light strip
What’s in the box
1*package
Specifications
- SKU: GE779CA3OT7ADNAFAMZ
- Model: avoid chenicals
- Production Country: China
- Size (L x W x H cm): 12 x 13 x 14 cm
- Weight (kg): 1
- Color: Matches the image
Customer Feedback
This product has no ratings yet.
/product/23/0717812/1.jpg?7704)
New Touch Induction Switch Air Separator River Table Light Strip Cell Coil Same Style 3V-24V Diy Coil Kit
UGX 134,150
UGX 204,89835%
Questions about this product?